Skip to content

Lithe Audio 8 inch, Passive Ceiling Speaker, 8 Ohms, 80W

SKU 03320
Sold out
Original price £130.00 (inc. VAT) - Original price £130.00 (inc. VAT)
Original price £130.00 (inc. VAT)
£130.00 (inc. VAT)
£130.00 (inc. VAT) - £130.00 (inc. VAT)
Current price £130.00 (inc. VAT)
DETAILS

The Perfect Companion Speaker For Expanding Your Ceiling Audio System - Lithe Audio 8" Passive Ceiling Speaker.

The Lithe Audio 8" Passive Ceiling Speaker is the perfect companion to the Lithe Audio LBT8 active speaker, designed for expanding an existing installation across a larger area. Built around the same 2-way coaxial driver configuration as the active unit - an 8" composite magnesium woofer paired with a 1" titanium directional tweeter, it delivers the same high-quality sound signature across your entire system.

Simple to install and easy to integrate, the passive speaker connects directly to any compatible amplifier or the speaker output of an active unit, making it a straightforward solution for extending audio coverage.

With an 8 Ohm impedance, 80W RMS power handling, and a frequency response of 35Hz - 23kHz, it is well suited to residential multi-room setups, commercial environments, and anywhere consistent, high-quality ceiling audio is required across multiple spaces.

Finished with the same magnetic paintable grille and IP44-rated enclosure as the active BT8, the passive speaker maintains a discrete, architectural look throughout your installation - ensuring a clean, consistent finish from room to room.

IP44 Rated For Bathroom & Kitchen Installations

The Lithe Audio 8" Speaker carries an IP44 rating, making it suitable for installation in bathrooms, kitchens, and other environments where exposure to moisture and splashes is a consideration. 

This makes it a practical choice for whole-home audio installations where consistent coverage, including wet rooms and utility spaces, is required without the need for separate, specialist speakers.

Lithe Audio 8" Passive Ceiling Speaker - Key Features:

  • High-Quality 2-Way Coaxial Driver: The same 8" composite magnesium woofer and 1" titanium tweeter as the active BT8, delivering a consistent sound signature across your installation.
  • 80W RMS Power Handling: Capable of handling up to 80W RMS, making it compatible with a wide range of amplifiers and active speaker outputs.
  • 8 Ohm Impedance: Standard 8 Ohm impedance for straightforward integration with compatible amplifiers and multi-speaker systems.
  • Wide Frequency Response: 35Hz - 23kHz frequency response ensures detailed, full-range audio reproduction across all types of content.
  • IP44 Rated: Suitable for installation in bathrooms, kitchens, and other moisture-prone environments when fitted in compliant zones.
  • Discrete Architectural Finish: A magnetic, paintable grille ensures a clean, consistent look throughout your installation, blending seamlessly into any ceiling décor.
  • Ideal System Expansion Speaker: Designed as a companion to the Lithe Audio BT8 active speaker, making it simple to extend audio coverage into additional rooms and zones.
HOW TO FIT


Easy installation

Powered via a lighting circuit or simply plugged into a UK mains plug using the supplied adaptor.

1. Cut out speaker

Using the cutting guide included. Mark out the speaker hole on the ceiling and cut with a Jabsaw.

2. Now plug into a power source 

Now power via the lighting circuit or simply plug in.
No speaker cables required in the walls with built-in amplifier & Bluetooth technology.

3. Tighten fold out clamps

Simply place speaker into the hole and using a  tighten the four fold-out clamps. No need to drill holes with these speakers! Simple to fit and easy to remove.

Now fit the paintable 3mm magnetic low profile grill that

blends perfectly with your interior. 

Download the Lithe Audio Bluetooth Ceiling Speaker Instruction Manual HERE

Any local electrician or kitchen fitter can install these speakers in around 30 minutes. If you have any questions about installation/setup our technical support team is available by phone to help you or your chosen electrician with the setup.

View all of the Lithe Audio range HERE

SPECS & DOWNLOADS

DOWNLOADS:

INSTALLATION GUIDE - Download HERE>

SPECIFICATION SHEET - Download HERE>

    Passive Speaker

    • Power Handling: 80W RMS
    • Impedance: 8 Ohms
    • Sensitivity: 91 dB
    • Driver Configuration: 2-way coaxial (8" woofer, 1" tweeter)
    • Frequency Response: 35Hz - 23kHz

    Physical & Installation

    • Cut-Out Diameter: Ø 255mm
    • Grille Diameter: Ø 275mm
    • Mounting Depth (Passive): 65mm
    • Enclosure Material: Fire-rated ABS chassis
    • Grille: Magnetic, paintable
    • IP Rating: IP44
    • Finish: White (paintable)

    Certifications

    CE, UKCA, FCC, RoHS, REACH, UL, ULC, BIS

    What's In The Box

    • Lithe Audio 8" Passive Ceiling Speaker
    • Magnetic Grille

    WHY BUY FROM US?

    WHY BUY FROM US?

    We are a verified Lithe Audio PRO PARTNER retailer. Purchase your Lithe Audio product from us & receive these benefits:

    • Free extended 3rd YEAR WARRANTY included
    • Free of charge CUSTOM BLUETOOTH naming service
    • Dedicated expert Lithe Audio TECHNICAL SUPPORT before & after your purchase

    We are Lithe Audio Pro Partners at Audio Volt

    }
    Sale now on at Audio Volt
    FEBRUARY SALE

    Lithe Audio Sale Now On

    Pay in 3 payments with Klarna at Audio Volt
    PAY IN 3 WITH Klarna

    18+, T&C apply, Credit subject to status

    Free UK Delivery on orders over £79.00 at Audio Volt
    FREE UK DELIVERY

    On orders over £99.00

    Fast next day delivery available at Audio Volt
    FAST DELIVERY AVAILABLE

    Next day tracked £9.95

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare