{"product_id":"dynacord-c3600fdi-dsp-power-amplifier","title":"Dynacord C3600FDi 3600W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord C3600FDi is a professional 3600W 2-Channel DSP Power Amplifier with FIR Drive technology, 31-band GEQ, 10-band PEQ, 70V\/100V direct drive, GPIO control and full SONICUE software integration — the flagship model in the C Series, delivering the highest output power and signal-to-noise ratio in the range for the most demanding permanent installation applications.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord C3600FDi is the flagship two-channel 3600W DSP power amplifier in the C Series range — delivering the greatest output power, the highest signal-to-noise ratio and the most headroom of any model in the series for permanent installation applications where maximum performance is the priority.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDesigned for demanding venues including bars, churches, restaurants, sports facilities and performing arts centres, the C3600FDi combines the same comprehensive FIR Drive DSP platform and SONICUE software integration as the rest of the C Series with the highest-power Class H amplifier stage in the range — making it the definitive choice for the largest zones, highest SPL requirements and most demanding installations where nothing less than the best will do. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuilt on an extremely robust power supply and powerful Class H amplifier design, the C3600FDi guarantees flawless operation even in the most demanding environments, with sophisticated protection circuitry ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi is equipped with the same comprehensive onboard DSP platform as the rest of the C Series. FIR Drive technology optimises original factory loudspeaker settings for a level of acoustic performance typically reserved for tour-grade amplifiers. Under SONICUE Sound System Software, the C3600FDi's DSP capabilities are further elevated with 10-band parametric EQ per channel, a dedicated array processing section, 31-band graphic EQ per channel, output delay per channel, FIR filters, audio limiters and load impedance monitoring — providing a fully integrated professional speaker processing platform accessible from an intuitive software interface. A front-panel LC display allows local control and supervision without a connected PC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaximum Power Output \u0026amp; Impedance Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi delivers up to 1700W per channel into 4 Ohm in dual-channel mode (3000W into 2 Ohm), with bridged mono operation providing up to 6000W into 4 Ohm or 3400W into 8 Ohm — the highest bridged output power in the C Series — for the most demanding single-zone high-output applications. Engineered for constant stability at 2 Ohms for both channels simultaneously, the C3600FDi handles the most demanding loudspeaker loads with confidence. Both 70V and 100V high-impedance direct drive operation are supported — delivering 2 x 1250W at 70V and 2 x 2500W at 100V in dual-channel mode — providing comprehensive flexibility across the widest range of distributed and direct-drive installation scenarios.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClass H Amplifier Topology for Maximum Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi utilises a Class H amplifier stage — a highly efficient rail-switching topology that tracks the audio signal and supplies only the voltage required at any given moment, significantly reducing heat dissipation and power consumption at typical programme levels whilst maintaining full peak output capability when demanded. This makes the C3600FDi an exceptionally efficient high-power amplifier for permanent installation applications, delivering 3600W of total output power from just 850W of power consumption at typical programme levels.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConnectivity \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi features Euroblock connectors for convenient professional installation wiring, remote GPIO control for integration with third-party control systems, remote power-on delay and full SONICUE network control and supervision. The efficient standby power mode reduces running costs and power consumption significantly — delivering a very low total cost of ownership for permanent installation applications where continuous operation is required.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord C3600FDi Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3600W Total Output Power:\u003c\/strong\u003e The highest output in the C Series — up to 1700W per channel (4Ω dual), 3200W single channel (2Ω), 6000W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H Amplifier Topology:\u003c\/strong\u003e Highly efficient rail-switching design for reduced heat dissipation and lower running costs at typical programme levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Premium tour-grade loudspeaker optimisation for unparalleled performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Full network control, supervision and enhanced DSP with 10-band PEQ and dedicated array processing section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Band PEQ Per Channel (SONICUE):\u003c\/strong\u003e Advanced parametric equalisation for detailed speaker and room correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Delay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 1250W high-impedance operation for distributed speaker system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 2500W (-1.5dB) for high-power 100V distributed system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 6000W into 4 Ohm — the highest bridged output in the C Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Control:\u003c\/strong\u003e Remote interface with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LC Display:\u003c\/strong\u003e Local amplifier control and supervision without a connected PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuroblock Connectors:\u003c\/strong\u003e Convenient, professional installation wiring throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power-On Delay:\u003c\/strong\u003e System sequencing for professional installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 109dB SNR (A-weighted):\u003c\/strong\u003e The highest signal-to-noise ratio in the C Series for exceptional audio clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57539260776821,"sku":"DYNC3600FDI","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNC3600FDI_Dynacord_F-01U-322-279_Image_1.webp?v=1788271933","url":"https:\/\/www.audiovolt.co.uk\/products\/dynacord-c3600fdi-dsp-power-amplifier","provider":"Audio Volt ","version":"1.0","type":"link"}