{"title":"Dynacord","description":null,"products":[{"product_id":"dynacord-u301m-mixer-amplifier","title":"Dynacord U30:1M 30W Half-Rack Mixer Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U30:1M is a compact 30W Half-Rack Mixer Amplifier with 4 inputs, phantom power, VOX ducking, EMG override, 2-tone chime and support for 4Ω, 8Ω, 70V and 100V operation — ideal for background music and voice announcement installations in bars, restaurants, retail, education and hospitality environments.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord U30:1M is a 30W Class D mixer amplifier designed for small to medium-sized commercial installations where quality, performance and reliability are paramount. Ideal for background music and voice announcement applications across bars, restaurants, retail outlets, educational institutions, houses of worship, museums, galleries, transport hubs and conference centres, the U30:1M delivers a comprehensive feature set in a remarkably compact half-rack 1U enclosure — opening up a wide range of installation possibilities even in space-constrained environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIncluded brackets facilitate single and dual rack-mount configurations, and desktop and under-counter installations are equally viable. When rack-mounted side by side, two U30:1M units occupy a single rack unit — effectively doubling both channel count and output power within the same rack space.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVersatile 4-Input Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U30:1M provides four input channels covering a wide range of source types. Inputs 1 and 2 are balanced mic\/line inputs with switchable 48V phantom power — Input 1 also features contact override with 2-tone chime for attention-grabbing paging alerts, whilst Input 2 includes VOX ducking that automatically reduces background music volume when a voice signal is detected, ensuring clear voice communication without manual intervention. Inputs 3 and 4 are unbalanced stereo RCA line inputs for media players and other consumer audio sources, converted to mono internally. A dedicated EMG input accepts both line-level and 100V signals for emergency message override, ensuring critical announcements are always heard clearly above all other audio sources.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U30:1M supports 4Ω, 8Ω, 70V and 100V speaker operation — selectable via DIP switch — for complete compatibility with both low-impedance and distributed 100V speaker systems. Bass and treble shelving EQ of ±12dB provides tonal shaping of the output signal, and two high-pass filters — a permanently active 70Hz filter and a switchable 120Hz filter — allow unwanted low-frequency content to be removed from the signal path for cleaner, more focused audio reproduction through installed speakers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComprehensive Protection \u0026amp; Status Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U30:1M incorporates a comprehensive protection suite including audio limiters, high temperature, DC, HF, short circuit and over-current protection on the amplifier, alongside mains over\/under voltage protection, inrush current limiting, mains over-current and high-temperature protection on the switching mode power supply. Front-panel status LEDs provide clear at-a-glance indication of power, signal, peak, call and protection status, and a remote power OFF contact closure input enables remote standby activation for energy-efficient operation when the system is not in use. Fanless convection cooling ensures silent operation across an operating temperature range of -5°C to +45°C.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U30:1M Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W Class D Amplifier:\u003c\/strong\u003e Efficient, fanless amplification for small to medium commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Inputs:\u003c\/strong\u003e 2 x balanced mic\/line with phantom power, 2 x unbalanced stereo RCA line inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48V Phantom Power:\u003c\/strong\u003e Per mic\/line input for condenser microphone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking (Input 2):\u003c\/strong\u003e Automatically reduces background music volume when a voice signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime (Input 1):\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFanless Convection Cooling:\u003c\/strong\u003e Silent operation for noise-sensitive installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530153697653,"sku":"DYNU301M","price":253.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU301M_Dynacord_F-01U-425-746_Image_1.webp?v=1787906091"},{"product_id":"dynacord-u601m-mixer-amplifier","title":"Dynacord U60:1M 60W Half-Rack Mixer Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U60:1M is a compact 60W Half-Rack Mixer Amplifier with 4 inputs, phantom power, VOX ducking, EMG override, 2-tone chime and support for 4Ω, 8Ω, 70V and 100V operation — the higher-powered sibling of the U30:1M, delivering the same comprehensive feature set with double the output for slightly larger commercial installations.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord U60:1M is a 60W Class D mixer amplifier designed for small to medium-sized commercial installations where quality, performance and reliability are paramount. Sharing the same comprehensive feature set and compact half-rack 1U enclosure as the U30:1M, the U60:1M steps up to 60W of output power — making it the ideal choice for installations where the 30W U30:1M falls slightly short, whilst retaining all the flexibility, versatile inputs and intelligent audio management features of the U30:1M platform.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIdeal for background music and voice announcement applications across bars, restaurants, retail outlets, educational institutions, houses of worship, museums, galleries, transport hubs and conference centres, included brackets facilitate single and dual rack-mount configurations alongside desktop and under-counter installations. When rack-mounted side by side, two U60:1M units occupy a single rack unit — effectively doubling both channel count and output power within the same rack space.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVersatile 4-Input Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U60:1M provides four input channels covering a wide range of source types. Inputs 1 and 2 are balanced mic\/line inputs with switchable 48V phantom power — Input 1 features contact override with 2-tone chime for attention-grabbing paging alerts, whilst Input 2 includes VOX ducking that automatically reduces background music volume when a voice signal is detected, ensuring clear voice communication without manual intervention. Inputs 3 and 4 are unbalanced stereo RCA line inputs for media players and other consumer audio sources, converted to mono internally. A dedicated EMG input accepts both line-level and 100V signals for emergency message override, ensuring critical announcements are always heard clearly above all other audio sources.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U60:1M supports 4Ω, 8Ω, 70V and 100V speaker operation — selectable via DIP switch — for complete compatibility with both low-impedance and distributed 100V speaker systems. Bass and treble shelving EQ of ±12dB provides tonal shaping of the output signal, and two high-pass filters — a permanently active 70Hz filter and a switchable 120Hz filter — allow unwanted low-frequency content to be removed from the signal path for cleaner, more focused audio reproduction through installed speakers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComprehensive Protection \u0026amp; Status Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U60:1M incorporates a comprehensive protection suite including audio limiters, high temperature, DC, HF, short circuit and over-current protection on the amplifier, alongside mains over\/under voltage protection, inrush current limiting, mains over-current and high-temperature protection on the switching mode power supply. Front-panel status LEDs provide clear at-a-glance indication of power, signal, peak, call and protection status, and a remote power OFF contact closure input enables remote standby activation for energy-efficient operation when the system is not in use. Fanless convection cooling ensures silent operation across an operating temperature range of -5°C to +45°C.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U60:1M Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W Class D Amplifier:\u003c\/strong\u003e Double the output power of the U30:1M for slightly larger commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Inputs:\u003c\/strong\u003e 2 x balanced mic\/line with phantom power, 2 x unbalanced stereo RCA line inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48V Phantom Power:\u003c\/strong\u003e Per mic\/line input for condenser microphone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking (Input 2):\u003c\/strong\u003e Automatically reduces background music volume when a voice signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime (Input 1):\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFanless Convection Cooling:\u003c\/strong\u003e Silent operation for noise-sensitive installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530226868597,"sku":"DYNU601M","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU601M_Dynacord_F-01U-425-747_Image_1.webp?v=1787908304"},{"product_id":"dynacord-u1201m-mixer-amplifier","title":"Dynacord U120:1M 120W Half-Rack Mixer Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U120:1M is a compact 120W Half-Rack Mixer Amplifier with 4 inputs, phantom power, VOX ducking, EMG override, 2-tone chime and support for 4Ω, 8Ω, 70V and 100V operation — ideal for background music and voice announcement installations in bars, restaurants, retail, education and hospitality environments requiring higher output power in a space-saving half-rack format.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord U120:1M is a 120W Class D mixer amplifier designed for small to medium-sized commercial installations where quality, performance and reliability are paramount. Delivering 120W of output power in a compact half-rack 1U enclosure, the U120:1M is ideal for background music and voice announcement applications across bars, restaurants, retail outlets, educational institutions, houses of worship, museums, galleries, transport hubs and conference centres.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIncluded brackets facilitate single and dual rack-mount configurations alongside desktop and under-counter installations. When rack-mounted side by side, two U120:1M units occupy a single rack unit — effectively doubling both channel count and output power within the same rack space.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVersatile 4-Input Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1M provides four input channels covering a wide range of source types. Inputs 1 and 2 are balanced mic\/line inputs with switchable 48V phantom power — Input 1 features contact override with 2-tone chime for attention-grabbing paging alerts, whilst Input 2 includes VOX ducking that automatically reduces background music volume when a voice signal is detected, ensuring clear voice communication without manual intervention. Inputs 3 and 4 are unbalanced stereo RCA line inputs for media players and other consumer audio sources, converted to mono internally. A dedicated EMG input accepts both line-level and 100V signals for emergency message override, ensuring critical announcements are always heard clearly above all other audio sources.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1M supports 4Ω, 8Ω, 70V and 100V speaker operation — selectable via DIP switch — for complete compatibility with both low-impedance and distributed 100V speaker systems. Bass and treble shelving EQ of ±12dB provides tonal shaping of the output signal, and two high-pass filters — a permanently active 20Hz filter and a switchable 120Hz filter — allow unwanted low-frequency content to be removed from the signal path for cleaner, more focused audio reproduction through installed speakers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComprehensive Protection, Status Monitoring \u0026amp; Fan Cooling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1M incorporates a comprehensive protection suite including audio limiters, high temperature, DC, HF, short circuit and over-current protection on the amplifier, alongside mains over\/under voltage protection, inrush current limiting, mains over-current and high-temperature protection on the switching mode power supply. Front-panel status LEDs provide clear at-a-glance indication of power, signal, peak, call and protection status, and a remote power OFF contact closure input enables remote standby activation for energy-efficient operation. Unlike the U30:1M and U60:1M, the U120:1M features a four-stage variable-speed fan cooling system — automatically adjusting fan speed between off, slow, medium and fast in response to thermal load — ensuring reliable thermal management at the higher power output levels of the 120W amplifier stage.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U120:1M Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Class D Amplifier:\u003c\/strong\u003e The highest-powered model in the U:1M half-rack series for larger commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Inputs:\u003c\/strong\u003e 2 x balanced mic\/line with phantom power, 2 x unbalanced stereo RCA line inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48V Phantom Power:\u003c\/strong\u003e Per mic\/line input for condenser microphone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking (Input 2):\u003c\/strong\u003e Automatically reduces background music volume when a voice signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime (Input 1):\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Variable-Speed Fan Cooling:\u003c\/strong\u003e Automatically adjusts between off, slow, medium and fast for reliable thermal management at higher power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530252099957,"sku":"DYNU1201M","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU1201M_Dynacord_F-01U-425-748_Image_1.webp?v=1787909502"},{"product_id":"dynacord-u2401m-mixer-amplifier","title":"Dynacord U240:1M 240W Half-Rack Mixer Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U240:1M is a compact 240W Half-Rack Mixer Amplifier with 4 inputs, phantom power, VOX ducking, EMG override, 2-tone chime and support for 4Ω, 8Ω, 70V and 100V operation — ideal for background music and voice announcement installations requiring substantial output power in a space-saving half-rack format.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Dynacord U240:1M \u003c\/span\u003e\u003cspan\u003eis a 240W Class D \u003c\/span\u003e\u003cspan\u003emixer amplifier \u003c\/span\u003e\u003cspan\u003edesigned for \u003c\/span\u003e\u003cspan\u003ecommercial \u003c\/span\u003e\u003cspan\u003einstallations where \u003c\/span\u003e\u003cspan\u003equality, performance \u003c\/span\u003e\u003cspan\u003eand reliability are \u003c\/span\u003e\u003cspan\u003eparamount. Delivering \u003c\/span\u003e\u003cspan\u003e240W of output power \u003c\/span\u003e\u003cspan\u003ein a compact \u003c\/span\u003e\u003cspan\u003ehalf-rack 1U \u003c\/span\u003e\u003cspan\u003eenclosure, the \u003c\/span\u003e\u003cspan\u003eU240:1M is ideal for \u003c\/span\u003e\u003cspan\u003ebackground music and \u003c\/span\u003e\u003cspan\u003evoice announcement \u003c\/span\u003e\u003cspan\u003eapplications across \u003c\/span\u003e\u003cspan\u003ebars, restaurants, \u003c\/span\u003e\u003cspan\u003eretail outlets, \u003c\/span\u003e\u003cspan\u003eeducational \u003c\/span\u003e\u003cspan\u003einstitutions, houses \u003c\/span\u003e\u003cspan\u003eof worship, museums, \u003c\/span\u003e\u003cspan\u003egalleries, transport \u003c\/span\u003e\u003cspan\u003ehubs and conference \u003c\/span\u003e\u003cspan\u003ecentres. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncluded \u003c\/span\u003e\u003cspan\u003ebrackets facilitate \u003c\/span\u003e\u003cspan\u003esingle and dual \u003c\/span\u003e\u003cspan\u003erack-mount \u003c\/span\u003e\u003cspan\u003econfigurations \u003c\/span\u003e\u003cspan\u003ealongside desktop and \u003c\/span\u003e\u003cspan\u003eunder-counter \u003c\/span\u003e\u003cspan\u003einstallations. When \u003c\/span\u003e\u003cspan\u003erack-mounted side by \u003c\/span\u003e\u003cspan\u003eside, two U240:1M \u003c\/span\u003e\u003cspan\u003eunits occupy a single \u003c\/span\u003e\u003cspan\u003erack unit — \u003c\/span\u003e\u003cspan\u003eeffectively doubling \u003c\/span\u003e\u003cspan\u003eboth channel count \u003c\/span\u003e\u003cspan\u003eand output power \u003c\/span\u003e\u003cspan\u003ewithin the same rack \u003c\/span\u003e\u003cspan\u003espace.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eVersatile 4-Input Configuration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1M provides four \u003c\/span\u003e\u003cspan\u003einput channels \u003c\/span\u003e\u003cspan\u003ecovering a wide range \u003c\/span\u003e\u003cspan\u003eof source types. \u003c\/span\u003e\u003cspan\u003eInputs 1 and 2 are \u003c\/span\u003e\u003cspan\u003ebalanced mic\/line \u003c\/span\u003e\u003cspan\u003einputs with \u003c\/span\u003e\u003cspan\u003eswitchable 48V \u003c\/span\u003e\u003cspan\u003ephantom power — Input \u003c\/span\u003e\u003cspan\u003e1 features contact \u003c\/span\u003e\u003cspan\u003eoverride with 2-tone \u003c\/span\u003e\u003cspan\u003echime for \u003c\/span\u003e\u003cspan\u003eattention-grabbing \u003c\/span\u003e\u003cspan\u003epaging alerts, whilst \u003c\/span\u003e\u003cspan\u003eInput 2 includes VOX \u003c\/span\u003e\u003cspan\u003educking that \u003c\/span\u003e\u003cspan\u003eautomatically reduces \u003c\/span\u003e\u003cspan\u003ebackground music \u003c\/span\u003e\u003cspan\u003evolume when a voice \u003c\/span\u003e\u003cspan\u003esignal is detected, \u003c\/span\u003e\u003cspan\u003eensuring clear voice \u003c\/span\u003e\u003cspan\u003ecommunication without \u003c\/span\u003e\u003cspan\u003emanual intervention. \u003c\/span\u003e\u003cspan\u003eInputs 3 and 4 are \u003c\/span\u003e\u003cspan\u003eunbalanced stereo RCA \u003c\/span\u003e\u003cspan\u003eline inputs for media \u003c\/span\u003e\u003cspan\u003eplayers and other \u003c\/span\u003e\u003cspan\u003econsumer audio \u003c\/span\u003e\u003cspan\u003esources, converted to \u003c\/span\u003e\u003cspan\u003emono internally. A \u003c\/span\u003e\u003cspan\u003ededicated EMG input \u003c\/span\u003e\u003cspan\u003eaccepts both \u003c\/span\u003e\u003cspan\u003eline-level and 100V \u003c\/span\u003e\u003cspan\u003esignals for emergency \u003c\/span\u003e\u003cspan\u003emessage override, \u003c\/span\u003e\u003cspan\u003eensuring critical \u003c\/span\u003e\u003cspan\u003eannouncements are \u003c\/span\u003e\u003cspan\u003ealways heard clearly \u003c\/span\u003e\u003cspan\u003eabove all other audio \u003c\/span\u003e\u003cspan\u003esources.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1M supports 4Ω, \u003c\/span\u003e\u003cspan\u003e8Ω, 70V and 100V \u003c\/span\u003e\u003cspan\u003espeaker operation — \u003c\/span\u003e\u003cspan\u003eselectable via DIP \u003c\/span\u003e\u003cspan\u003eswitch — for complete \u003c\/span\u003e\u003cspan\u003ecompatibility with \u003c\/span\u003e\u003cspan\u003eboth low-impedance \u003c\/span\u003e\u003cspan\u003eand distributed 100V \u003c\/span\u003e\u003cspan\u003espeaker systems. Bass \u003c\/span\u003e\u003cspan\u003eand treble shelving \u003c\/span\u003e\u003cspan\u003eEQ of ±12dB provides \u003c\/span\u003e\u003cspan\u003etonal shaping of the \u003c\/span\u003e\u003cspan\u003eoutput signal, and \u003c\/span\u003e\u003cspan\u003etwo high-pass filters \u003c\/span\u003e\u003cspan\u003e— a \u003c\/span\u003e\u003cspan\u003epermanently active \u003c\/span\u003e\u003cspan\u003e20Hz filter and a \u003c\/span\u003e\u003cspan\u003eswitchable 120Hz \u003c\/span\u003e\u003cspan\u003efilter — allow \u003c\/span\u003e\u003cspan\u003eunwanted \u003c\/span\u003e\u003cspan\u003elow-frequency content \u003c\/span\u003e\u003cspan\u003eto be removed from \u003c\/span\u003e\u003cspan\u003ethe signal path for \u003c\/span\u003e\u003cspan\u003ecleaner, more focused \u003c\/span\u003e\u003cspan\u003eaudio reproduction \u003c\/span\u003e\u003cspan\u003ethrough installed \u003c\/span\u003e\u003cspan\u003espeakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eComprehensive Protection, Status Monitoring \u0026amp; Fan Cooling\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1M incorporates \u003c\/span\u003e\u003cspan\u003ea comprehensive \u003c\/span\u003e\u003cspan\u003eprotection suite \u003c\/span\u003e\u003cspan\u003eincluding audio \u003c\/span\u003e\u003cspan\u003elimiters, high \u003c\/span\u003e\u003cspan\u003etemperature, DC, HF, \u003c\/span\u003e\u003cspan\u003eshort circuit and \u003c\/span\u003e\u003cspan\u003eover-current \u003c\/span\u003e\u003cspan\u003eprotection on the \u003c\/span\u003e\u003cspan\u003eamplifier, alongside \u003c\/span\u003e\u003cspan\u003emains over\/under \u003c\/span\u003e\u003cspan\u003evoltage protection, \u003c\/span\u003e\u003cspan\u003einrush current \u003c\/span\u003e\u003cspan\u003elimiting, mains \u003c\/span\u003e\u003cspan\u003eover-current and \u003c\/span\u003e\u003cspan\u003ehigh-temperature \u003c\/span\u003e\u003cspan\u003eprotection on the \u003c\/span\u003e\u003cspan\u003eswitching mode power \u003c\/span\u003e\u003cspan\u003esupply. Front-panel \u003c\/span\u003e\u003cspan\u003estatus LEDs provide \u003c\/span\u003e\u003cspan\u003eclear at-a-glance \u003c\/span\u003e\u003cspan\u003eindication of power, \u003c\/span\u003e\u003cspan\u003esignal, \u003c\/span\u003e\u003cspan\u003epeak, call and \u003c\/span\u003e\u003cspan\u003eprotection status, \u003c\/span\u003e\u003cspan\u003eand a remote power \u003c\/span\u003e\u003cspan\u003eOFF contact closure \u003c\/span\u003e\u003cspan\u003einput enables \u003c\/span\u003e\u003cspan\u003eremote standby \u003c\/span\u003e\u003cspan\u003eactivation for \u003c\/span\u003e\u003cspan\u003eenergy-efficient \u003c\/span\u003e\u003cspan\u003eoperation. A \u003c\/span\u003e\u003cspan\u003efour-stage \u003c\/span\u003e\u003cspan\u003evariable-speed fan \u003c\/span\u003e\u003cspan\u003ecooling system \u003c\/span\u003e\u003cspan\u003eautomatically adjusts \u003c\/span\u003e\u003cspan\u003efan speed between \u003c\/span\u003e\u003cspan\u003eoff, slow, medium and \u003c\/span\u003e\u003cspan\u003efast in response to \u003c\/span\u003e\u003cspan\u003ethermal load — \u003c\/span\u003e\u003cspan\u003eensuring reliable \u003c\/span\u003e\u003cspan\u003ethermal management at \u003c\/span\u003e\u003cspan\u003ethe high output power \u003c\/span\u003e\u003cspan\u003elevels of the 240W \u003c\/span\u003e\u003cspan\u003eamplifier stage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U240:1M Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240W Class D Amplifier:\u003c\/strong\u003e High-output half-rack amplification for commercial installations requiring substantial power in a space-saving format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Inputs:\u003c\/strong\u003e 2 x balanced mic\/line with phantom power, 2 x unbalanced stereo RCA line inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 48V Phantom Power:\u003c\/strong\u003e Per mic\/line input for condenser microphone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOX Ducking (Input 2):\u003c\/strong\u003e Automatically reduces background music volume when a voice signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime (Input 1):\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Variable-Speed Fan Cooling:\u003c\/strong\u003e Automatically adjusts between off, slow, medium and fast for reliable thermal management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530266780021,"sku":"DYNU2401M","price":479.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU2401M_Dynacord_F-01U-425-749_Image_1.webp?v=1787909969"},{"product_id":"dynacord-u1201-power-amplifier","title":"Dynacord U120:1 120W Half-Rack Power Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U120:1 is a compact 120W Half-Rack Power Amplifier with EMG override, 2-tone chime, bass and treble EQ, switchable high-pass filter and support for 4Ω, 8Ω, 70V and 100V operation — a streamlined, single-input power amplifier for background music and voice announcement installations in commercial environments.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord U120:1 is a 120W Class D power amplifier designed for commercial installations where quality, performance and reliability are paramount. Unlike the U:1M mixer amplifier models in the Dynacord U series, the U120:1 is a dedicated power amplifier with a single line input — making it the ideal choice for installations where mixing and source selection is handled upstream by a separate mixer or zone controller, and a reliable, compact and space-efficient power amplifier is needed to drive the speaker system.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDelivering 120W of output power in a half-rack 1U enclosure, the U120:1 is suitable for background music and voice announcement applications across bars, restaurants, retail outlets, educational institutions, houses of worship, museums, galleries, transport hubs and conference centres. Included brackets facilitate single and dual rack-mount configurations alongside desktop and under-counter installations, and when rack-mounted side by side, two U120:1 units occupy a single rack unit — effectively doubling channel count and output power within the same rack space.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSingle Line Input with EMG Override\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1 accepts a single line-level input via unbalanced stereo RCA (mono summed) or a balanced 3-pin Eurostyle connector, with a sensitivity of 100mV and an input impedance of 4.6kΩ. A dedicated EMG input accepts both line-level and 100V signals for emergency message override — ensuring critical announcements are always heard clearly above all other audio sources, with a DIP-switch selectable EMG input mode for HiZ or line-level signal compatibility. A contact override with 2-tone chime provides an additional attention-grabbing paging alert capability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1 supports 4Ω, 8Ω, 70V and 100V speaker operation — selectable via DIP switch — for complete compatibility with both low-impedance and distributed 100V speaker systems. Bass and treble shelving EQ of ±12dB provides tonal shaping of the output signal, and two high-pass filters — a permanently active 20Hz filter and a switchable 120Hz filter — allow unwanted low-frequency content to be removed from the signal path for cleaner audio reproduction through installed speakers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComprehensive Protection, Status Monitoring \u0026amp; Fan Cooling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe U120:1 incorporates a comprehensive protection suite including audio limiters, high temperature, DC, HF, short circuit and over-current protection on the amplifier, alongside mains over\/under voltage protection, inrush current limiting, mains over-current and high-temperature protection on the switching mode power supply. Front-panel status LEDs provide clear at-a-glance indication of power, signal, peak, call and protection status, and a remote power OFF contact closure input enables remote standby activation for energy-efficient operation. A four-stage variable-speed fan cooling system automatically adjusts fan speed between off, slow, medium and fast in response to thermal load for reliable thermal management.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U120:1 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Class D Power Amplifier:\u003c\/strong\u003e Compact half-rack amplification for commercial installations where mixing is handled upstream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Line Input:\u003c\/strong\u003e Unbalanced RCA (mono summed) or balanced 3-pin Eurostyle for straightforward integration with any upstream mixer or zone controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime:\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Variable-Speed Fan Cooling:\u003c\/strong\u003e Automatically adjusts between off, slow, medium and fast for reliable thermal management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530278838645,"sku":"DYNU1201","price":347.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU1201_Dynacord_F-01U-425-740_Image_1.webp?v=1787910638"},{"product_id":"dynacord-u2401-power-amplifier","title":"Dynacord U240:1 240W Half-Rack Power Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord U240:1 is a compact 240W Half-Rack Power Amplifier with EMG override, 2-tone chime, bass and treble EQ, switchable high-pass filter and support for 4Ω, 8Ω, 70V and 100V operation — a high-output, streamlined power amplifier for background music and voice announcement installations in commercial environments.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eDynacord U240:1 is a \u003c\/span\u003e\u003cspan\u003e240W Class D power \u003c\/span\u003e\u003cspan\u003eamplifier designed \u003c\/span\u003e\u003cspan\u003efor commercial \u003c\/span\u003e\u003cspan\u003einstallations where \u003c\/span\u003e\u003cspan\u003equality, performance \u003c\/span\u003e\u003cspan\u003eand reliability are \u003c\/span\u003e\u003cspan\u003eparamount. A \u003c\/span\u003e\u003cspan\u003ededicated power \u003c\/span\u003e\u003cspan\u003eamplifier with a \u003c\/span\u003e\u003cspan\u003esingle line input, \u003c\/span\u003e\u003cspan\u003ethe U240:1 is the \u003c\/span\u003e\u003cspan\u003eideal choice for \u003c\/span\u003e\u003cspan\u003einstallations where \u003c\/span\u003e\u003cspan\u003emixing and source \u003c\/span\u003e\u003cspan\u003eselection is handled \u003c\/span\u003e\u003cspan\u003eupstream by a \u003c\/span\u003e\u003cspan\u003eseparate mixer or \u003c\/span\u003e\u003cspan\u003ezone controller, and \u003c\/span\u003e\u003cspan\u003ea reliable, compact \u003c\/span\u003e\u003cspan\u003eand high-output power \u003c\/span\u003e\u003cspan\u003eamplifier is needed \u003c\/span\u003e\u003cspan\u003eto drive the speaker \u003c\/span\u003e\u003cspan\u003esystem. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDelivering \u003c\/span\u003e\u003cspan\u003e240W of output power \u003c\/span\u003e\u003cspan\u003ein a half-rack 1U \u003c\/span\u003e\u003cspan\u003eenclosure, the U240:1 \u003c\/span\u003e\u003cspan\u003eis suitable for \u003c\/span\u003e\u003cspan\u003ebackground music and \u003c\/span\u003e\u003cspan\u003evoice announcement \u003c\/span\u003e\u003cspan\u003eapplications across \u003c\/span\u003e\u003cspan\u003ebars, restaurants, \u003c\/span\u003e\u003cspan\u003eretail outlets, \u003c\/span\u003e\u003cspan\u003eeducational \u003c\/span\u003e\u003cspan\u003einstitutions, houses \u003c\/span\u003e\u003cspan\u003eof worship, museums, \u003c\/span\u003e\u003cspan\u003egalleries, transport \u003c\/span\u003e\u003cspan\u003ehubs and conference \u003c\/span\u003e\u003cspan\u003ecentres. Included \u003c\/span\u003e\u003cspan\u003ebrackets facilitate \u003c\/span\u003e\u003cspan\u003esingle and dual \u003c\/span\u003e\u003cspan\u003erack-mount \u003c\/span\u003e\u003cspan\u003econfigurations \u003c\/span\u003e\u003cspan\u003ealongside desktop and \u003c\/span\u003e\u003cspan\u003eunder-counter \u003c\/span\u003e\u003cspan\u003einstallations, and \u003c\/span\u003e\u003cspan\u003ewhen rack-mounted \u003c\/span\u003e\u003cspan\u003eside by side, two \u003c\/span\u003e\u003cspan\u003eU240:1 units occupy a \u003c\/span\u003e\u003cspan\u003esingle rack unit — \u003c\/span\u003e\u003cspan\u003eeffectively doubling \u003c\/span\u003e\u003cspan\u003echannel count and \u003c\/span\u003e\u003cspan\u003eoutput power within \u003c\/span\u003e\u003cspan\u003ethe same rack space.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eSingle Line Input with EMG Override\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1 accepts a \u003c\/span\u003e\u003cspan\u003esingle line-level \u003c\/span\u003e\u003cspan\u003einput via unbalanced \u003c\/span\u003e\u003cspan\u003estereo RCA (mono \u003c\/span\u003e\u003cspan\u003esummed) or a balanced \u003c\/span\u003e\u003cspan\u003e3-pin Eurostyle \u003c\/span\u003e\u003cspan\u003econnector, with a \u003c\/span\u003e\u003cspan\u003esensitivity of 100mV \u003c\/span\u003e\u003cspan\u003eand an input \u003c\/span\u003e\u003cspan\u003eimpedance of 4.6kΩ. A \u003c\/span\u003e\u003cspan\u003ededicated EMG input \u003c\/span\u003e\u003cspan\u003eaccepts both \u003c\/span\u003e\u003cspan\u003eline-level and 100V \u003c\/span\u003e\u003cspan\u003esignals for emergency \u003c\/span\u003e\u003cspan\u003emessage override — \u003c\/span\u003e\u003cspan\u003eensuring critical \u003c\/span\u003e\u003cspan\u003eannouncements are \u003c\/span\u003e\u003cspan\u003ealways heard clearly \u003c\/span\u003e\u003cspan\u003eabove all other audio \u003c\/span\u003e\u003cspan\u003esources, with a \u003c\/span\u003e\u003cspan\u003eDIP-switch selectable \u003c\/span\u003e\u003cspan\u003eEMG input mode for \u003c\/span\u003e\u003cspan\u003eHiZ or line-level \u003c\/span\u003e\u003cspan\u003esignal compatibility. \u003c\/span\u003e\u003cspan\u003eA contact override \u003c\/span\u003e\u003cspan\u003ewith 2-tone chime \u003c\/span\u003e\u003cspan\u003eprovides an \u003c\/span\u003e\u003cspan\u003eadditional \u003c\/span\u003e\u003cspan\u003eattention-grabbing \u003c\/span\u003e\u003cspan\u003epaging alert \u003c\/span\u003e\u003cspan\u003ecapability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eFull Impedance Flexibility \u0026amp; DSP\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1 supports 4Ω, \u003c\/span\u003e\u003cspan\u003e8Ω, 70V and 100V \u003c\/span\u003e\u003cspan\u003espeaker operation — \u003c\/span\u003e\u003cspan\u003eselectable via DIP \u003c\/span\u003e\u003cspan\u003eswitch — for complete \u003c\/span\u003e\u003cspan\u003ecompatibility with \u003c\/span\u003e\u003cspan\u003eboth low-impedance \u003c\/span\u003e\u003cspan\u003eand distributed 100V \u003c\/span\u003e\u003cspan\u003espeaker systems. Bass \u003c\/span\u003e\u003cspan\u003eand treble shelving \u003c\/span\u003e\u003cspan\u003eEQ of ±12dB provides \u003c\/span\u003e\u003cspan\u003etonal shaping of the \u003c\/span\u003e\u003cspan\u003eoutput signal, and \u003c\/span\u003e\u003cspan\u003etwo high-pass filters \u003c\/span\u003e\u003cspan\u003e— a permanently \u003c\/span\u003e\u003cspan\u003eactive 20Hz filter \u003c\/span\u003e\u003cspan\u003eand a switchable \u003c\/span\u003e\u003cspan\u003e120Hz filter — allow \u003c\/span\u003e\u003cspan\u003eunwanted \u003c\/span\u003e\u003cspan\u003elow-frequency content \u003c\/span\u003e\u003cspan\u003eto be removed from \u003c\/span\u003e\u003cspan\u003ethe signal path for \u003c\/span\u003e\u003cspan\u003ecleaner audio \u003c\/span\u003e\u003cspan\u003ereproduction through \u003c\/span\u003e\u003cspan\u003einstalled speakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eComprehensive Protection, Status Monitoring \u0026amp; Fan Cooling\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eU240:1 incorporates a \u003c\/span\u003e\u003cspan\u003ecomprehensive \u003c\/span\u003e\u003cspan\u003eprotection suite \u003c\/span\u003e\u003cspan\u003eincluding audio \u003c\/span\u003e\u003cspan\u003elimiters, high \u003c\/span\u003e\u003cspan\u003etemperature, DC, HF, \u003c\/span\u003e\u003cspan\u003eshort circuit and \u003c\/span\u003e\u003cspan\u003eover-current \u003c\/span\u003e\u003cspan\u003eprotection on the \u003c\/span\u003e\u003cspan\u003eamplifier, alongside \u003c\/span\u003e\u003cspan\u003emains over\/under \u003c\/span\u003e\u003cspan\u003evoltage protection, \u003c\/span\u003e\u003cspan\u003einrush current \u003c\/span\u003e\u003cspan\u003elimiting, mains \u003c\/span\u003e\u003cspan\u003eover-current and \u003c\/span\u003e\u003cspan\u003ehigh-temperature \u003c\/span\u003e\u003cspan\u003eprotection on the \u003c\/span\u003e\u003cspan\u003eswitching mode power \u003c\/span\u003e\u003cspan\u003esupply. Front-panel \u003c\/span\u003e\u003cspan\u003estatus LEDs provide \u003c\/span\u003e\u003cspan\u003eclear at-a-glance \u003c\/span\u003e\u003cspan\u003eindication of power, \u003c\/span\u003e\u003cspan\u003esignal, peak, call \u003c\/span\u003e\u003cspan\u003eand protection \u003c\/span\u003e\u003cspan\u003estatus, and a remote \u003c\/span\u003e\u003cspan\u003epower OFF contact \u003c\/span\u003e\u003cspan\u003eclosure input enables \u003c\/span\u003e\u003cspan\u003eremote standby \u003c\/span\u003e\u003cspan\u003eactivation for \u003c\/span\u003e\u003cspan\u003eenergy-efficient \u003c\/span\u003e\u003cspan\u003eoperation. A \u003c\/span\u003e\u003cspan\u003efour-stage \u003c\/span\u003e\u003cspan\u003evariable-speed fan \u003c\/span\u003e\u003cspan\u003ecooling system \u003c\/span\u003e\u003cspan\u003eautomatically adjusts \u003c\/span\u003e\u003cspan\u003efan speed between \u003c\/span\u003e\u003cspan\u003eoff, slow, medium and \u003c\/span\u003e\u003cspan\u003efast in response to \u003c\/span\u003e\u003cspan\u003ethermal load for \u003c\/span\u003e\u003cspan\u003ereliable thermal \u003c\/span\u003e\u003cspan\u003emanagement at the \u003c\/span\u003e\u003cspan\u003ehigh output power \u003c\/span\u003e\u003cspan\u003elevels of the 240W \u003c\/span\u003e\u003cspan\u003eamplifier stage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord U240:1 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240W Class D Power Amplifier:\u003c\/strong\u003e High-output compact half-rack amplification for commercial installations where mixing is handled upstream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Line Input:\u003c\/strong\u003e Unbalanced RCA (mono summed) or balanced 3-pin Eurostyle for straightforward integration with any upstream mixer or zone controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Line and 100V emergency message input — ensures critical announcements are always heard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact Override with 2-Tone Chime:\u003c\/strong\u003e Attention-grabbing chime and priority override for paging applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4Ω, 8Ω, 70V \u0026amp; 100V Speaker Operation:\u003c\/strong\u003e DIP switch selectable for full low-impedance and distributed system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass \u0026amp; Treble Shelving EQ:\u003c\/strong\u003e ±12dB at 150Hz and 5kHz for tonal shaping of the output signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20Hz (Permanent) \u0026amp; 120Hz (Switchable) High-Pass Filters:\u003c\/strong\u003e Remove unwanted low-frequency content from the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Stage Variable-Speed Fan Cooling:\u003c\/strong\u003e Automatically adjusts between off, slow, medium and fast for reliable thermal management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power OFF:\u003c\/strong\u003e Contact closure input for remote standby activation and energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Power, signal, peak, call and protection status indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, short circuit, over-current and mains protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop, under-counter and side-by-side dual configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530287194485,"sku":"DYNU2401","price":398.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNU2401_Dynacord_F-01U-425-741_Image_1.webp?v=1787911084"},{"product_id":"dynacord-v6004-600w-power-amplifier","title":"Dynacord V600:4 4-Channel 600W Power Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord V600:4 is a compact 1U 4-Channel 600W Power Amplifier with powerTANK flexible load sharing, ecoRAIL low-consumption idle mode, dualCOOL thermal management and support for 4Ω, 8Ω, 70V and 100V operation — a versatile, easy-to-install and energy-efficient power amplifier for commercial background music and announcement installations.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord V600:4 is a four-channel 600W Class D power amplifier designed as the recommended go-to solution for consultants, installers and specifiers working on small to mid-sized commercial installation projects. Covering education, hospitality, retail, houses of worship and more, the V600:4 combines best-in-class features with innovative Dynacord technologies in a compact 1U form factor — delivering real professional performance, flexible power allocation and resource-efficient power consumption at an attractive price point.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eQuick to install and designed to run trouble-free even under demanding power conditions, the V600:4 is the ideal choice for background music and announcement systems wherever a sturdy, versatile and energy-conscious power amplifier is required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rw4vauGxOXc?si=l33gTMNUa7Spdanb\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003epowerTANK — Flexible Power Allocation Across All Zones\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt the heart of the V600:4 is Dynacord's proprietary powerTANK technology — a power reservoir that makes the full 600W of total amplifier power available flexibly across all four channels, rather than fixing a rigid power allocation per channel. With 4 x 150W rated power and up to 300W maximum output per channel via power sharing, the V600:4 can simultaneously serve zones with very different power requirements — for example, driving compact loudspeakers in a small kitchen area alongside larger loudspeakers in an auditorium from the same amplifier, with powerTANK automatically allocating power where it is needed without any manual configuration. Variable Load Drive (VLD) ensures that powerTANK capacity is utilised efficiently, providing consistent power to any channel at any impedance. In conjunction with a DSP matrix such as the Dynacord MXE5 Matrix Mix Engine, the V600:4 can also be specified for larger distributed installations as a distribution amplifier for smaller zones.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eecoRAIL \u0026amp; Auto Power Down for Energy Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe V600:4's ecoRAIL technology delivers power consumption similar to a regular standby level whilst still producing audio output suitable for background music applications — significantly reducing the energy cost of running a permanent installation compared to a conventional amplifier operating at idle. Auto Power Down (APD) mode reduces power consumption to less than 1W when no signal is present for extended periods, making the V600:4 one of the most energy-efficient amplifiers available in its class.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003edualCOOL Thermal Management\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe dualCOOL thermal design allows the V600:4 to operate as a convection-cooled amplifier in typical conditions — making it completely silent in normal use — whilst an intelligent multi-speed fan engages automatically in extreme thermal conditions to ensure maximum performance and reliability. This makes the V600:4 suitable for both open rack and close-packed rack installation environments, with forced cooling available from side to rear when spacing between units is not possible.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePFC Power Supply \u0026amp; Comprehensive Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe V600:4 is equipped with a Power Factor Correction (PFC) switching power supply and a comprehensive protection suite — including audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters and mains over\/under voltage protection — ensuring the amplifier resists complete shutdown situations and performs reliably under all mains conditions. Front-panel signal, limit and fault LEDs per channel alongside a power LED provide clear at-a-glance system status monitoring, and a galvanically isolated READY\/FAULT relay output and remote on\/standby contact closure provide system integration and monitoring capability.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord V600:4 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel 600W powerTANK Amplifier:\u003c\/strong\u003e Flexible power reservoir allocates up to 300W per channel automatically — no manual configuration required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 150W Rated Power (4Ω, 8Ω, 70V \u0026amp; 100V):\u003c\/strong\u003e Full impedance flexibility for low-impedance and distributed 100V speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD):\u003c\/strong\u003e Ensures efficient powerTANK utilisation with consistent power delivery at any impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eecoRAIL Low-Consumption Idle Mode:\u003c\/strong\u003e Background-music-capable idle mode with significantly reduced power consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Power Down (APD):\u003c\/strong\u003e \u0026lt; 1W power consumption when no signal present for extended periods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003edualCOOL Thermal Management:\u003c\/strong\u003e Convection-cooled in normal use — intelligent multi-speed fan engages automatically in extreme conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFC Switching Power Supply:\u003c\/strong\u003e Resists shutdown under demanding mains conditions for reliable continuous operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Processing:\u003c\/strong\u003e Input routing, HPF 24dB\/oct, LPF 24dB\/oct, flat and peak limiter per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMP-LINK RJ45 Input:\u003c\/strong\u003e Parallel input connectivity for simplified multi-amplifier system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote On \/ Standby Contact:\u003c\/strong\u003e Overrides front-panel power button for remote system control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanically Isolated READY\/FAULT Relay Output:\u003c\/strong\u003e System integration and fault monitoring capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Status LEDs:\u003c\/strong\u003e Signal, limit and fault per channel plus power LED.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 1U Form Factor:\u003c\/strong\u003e Minimal rack space for maximum installation flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvection or Forced Cooling:\u003c\/strong\u003e Suitable for open and close-packed rack installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Education, Hospitality, Retail \u0026amp; Houses of Worship:\u003c\/strong\u003e A versatile, energy-efficient and easy-to-install commercial power amplifier.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57530722484597,"sku":"DYNV6004","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNV6004_Dynacord_F-01U-409-543_Image_1.webp?v=1787913994"},{"product_id":"dynacord-v6002-power-amplifier","title":"Dynacord V600:2 2-Channel 600W Power Amplifier 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord V600:2 is a compact half-rack 2-Channel 600W Power Amplifier with powerTANK flexible load sharing, ecoRAIL low-consumption idle mode, dualCOOL thermal management and support for 4Ω, 8Ω, 70V and 100V operation — delivering the same advanced Dynacord technology as the V600:4 in a space-saving two-channel half-rack format.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord V600:2 is a two-channel 600W power amplifier designed for small to mid-sized fixed installations requiring higher SPL levels or greater per-channel power than a four-channel model provides — whilst retaining the same best-in-class Dynacord technologies, energy efficiency and installation flexibility as the V600:4. Suitable for background music and announcement applications as well as higher output applications across educational facilities, hospitality venues, retail areas and houses of worship, the V600:2 combines professional performance with a compact half-rack 1U form factor that opens up a wide range of installation possibilities even in space-constrained environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIncluded brackets facilitate single and dual rack-mount configurations alongside desktop and under-counter installations, and when rack-mounted side by side, two V600:2 units occupy a single rack unit — effectively doubling channel count and output power within the same rack space. Integrators can also mix and match V600:2 and V600:4 models within the same installation to precisely meet the specific power and channel count requirements of each project.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rw4vauGxOXc?si=l33gTMNUa7Spdanb\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003epowerTANK — Flexible Power Allocation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe V600:2 features Dynacord's proprietary powerTANK technology — a power reservoir that makes the full 600W of total amplifier power available flexibly across both channels, with up to 500W or 600W maximum output per channel via power sharing depending on impedance. With 2 x 300W rated power, powerTANK automatically allocates power where it is needed between channels without any manual configuration, ensuring both zones always have access to the power they require. Variable Load Drive (VLD) ensures efficient powerTANK utilisation with consistent power delivery at any impedance across 4Ω, 8Ω, 70V and 100V operation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eecoRAIL \u0026amp; Auto Power Down for Energy Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eecoRAIL technology delivers power consumption similar to a regular standby level — less than 12W with no input signal — whilst still producing audio output suitable for background music applications. Auto Power Down (APD) mode reduces power consumption to less than 1W when no signal is present for extended periods, making the V600:2 one of the most energy-efficient amplifiers available in its class for permanent commercial installations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003edualCOOL Thermal Management\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe dualCOOL thermal design allows the V600:2 to operate as a completely silent convection-cooled amplifier in typical conditions, with an intelligent multi-speed fan engaging automatically only in extreme thermal conditions to ensure maximum performance and reliability. This makes the V600:2 suitable for both open rack and close-packed rack installation environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePFC Power Supply \u0026amp; Comprehensive Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe V600:2 is equipped with a Power Factor Correction (PFC) switching power supply and a comprehensive protection suite — including audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters and mains over\/under voltage protection — ensuring reliable, continuous operation under all mains conditions.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord V600:2 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel 600W powerTANK Amplifier:\u003c\/strong\u003e Flexible power reservoir allocates up to 500–600W per channel automatically — no manual configuration required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 300W Rated Power (4Ω \/ 8Ω \/ 70V \/ 100V):\u003c\/strong\u003e Full impedance flexibility for low-impedance and distributed 100V speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD):\u003c\/strong\u003e Efficient powerTANK utilisation with consistent power at any impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eecoRAIL Low-Consumption Idle Mode:\u003c\/strong\u003e \u0026lt; 12W with no input signal — background-music-capable with significantly reduced energy consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Power Down (APD):\u003c\/strong\u003e \u0026lt; 1W power consumption when no signal present for extended periods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003edualCOOL Thermal Management:\u003c\/strong\u003e Silent convection cooling in normal use — intelligent multi-speed fan engages automatically in extreme conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFC Switching Power Supply:\u003c\/strong\u003e Resists shutdown under demanding mains conditions for reliable continuous operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Processing:\u003c\/strong\u003e Input routing, HPF (30\/50\/100\/150Hz), LPF (150Hz), 24dB\/oct filter and peak limiter per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES72-1E RJ45 Input:\u003c\/strong\u003e Parallel input connectivity for simplified multi-amplifier system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Port:\u003c\/strong\u003e 5-pin Euroblock for system integration and remote standby control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Rack 1U Enclosure:\u003c\/strong\u003e Two units mount side by side in a single rack unit — doubling channel count and output power within the same rack space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix \u0026amp; Match with V600:4:\u003c\/strong\u003e Combine with the V600:4 to precisely meet the channel count and power requirements of any project.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e 19\" rack, half-rack, desktop and under-counter configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature -5°C to +45°C:\u003c\/strong\u003e Suitable for a wide range of commercial installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Education, Hospitality, Retail \u0026amp; Houses of Worship:\u003c\/strong\u003e Professional two-channel power amplification for commercial fixed installations.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57531048001909,"sku":"DYNV6002","price":819.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNV6002_Dynacord_F-01U-410-738_Image_1.webp?v=1787915799"},{"product_id":"dynacord-c1300fdi-dsp-power-amplifier","title":"Dynacord C1300FDi 1300W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω","description":"\u003ch3\u003eThe Dynacord C1300FDi is a professional 2-Channel DSP Power Amplifier delivering 1300W total output with FIR Drive technology, 10-band PEQ, 31-band GEQ, 70V\/100V direct drive, GPIO control and full SONICUE software integration — engineered in Germany for permanent installation in bars, restaurants, houses of worship, sports facilities and performing arts centres.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord C1300FDi is the entry-level model in the C Series range of professional DSP power amplifiers — designed specifically for permanent installation applications delivering background or live music in venues including bars, churches, restaurants, sports facilities and performing arts centres. Built on an extremely robust power supply and powerful Class AB amplifier design, the C1300FDi guarantees flawless operation even in the most demanding environments, with sophisticated protection circuitry ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEngineered and manufactured in Germany to the highest professional standards, the C Series represents a compelling combination of market-leading acoustic performance, rock-solid reliability and genuinely professional processing capability at an exceptional price point.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C1300FDi is equipped with a comprehensive onboard DSP platform that sets it apart from conventional power amplifiers in its class. FIR Drive technology — a premium feature typically reserved for tour-grade amplifiers — optimises original factory loudspeaker settings to deliver a level of acoustic performance that is simply unheard of at this price point. Under SONICUE Sound System Software, the C1300FDi's DSP capabilities are further elevated with 10-band parametric EQ per channel, a dedicated array processing section, 31-band graphic EQ per channel, output delay per channel, FIR filters, audio limiters and load impedance monitoring — providing a fully integrated professional speaker processing platform accessible from an intuitive software interface. A front-panel LC display allows local control and supervision of the amplifier without a connected PC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExceptional Power Output \u0026amp; Impedance Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C1300FDi delivers up to 660W per channel into 4 Ohm in dual-channel mode (1000W into 2 Ohm), with bridged mono operation providing up to 2000W into 4 Ohm or 1200W into 8 Ohm for demanding single-zone high-output applications. Engineered for constant stability at 2 Ohms for both channels simultaneously, the C1300FDi handles the most demanding loudspeaker loads with confidence. Both 70V and 100V high-impedance direct drive operation are supported for distributed speaker system integration, with a maximum direct drive load capability of 625W at 70V, providing comprehensive flexibility across a wide range of installation scenarios.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConnectivity \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C1300FDi features Euroblock connectors for convenient professional installation wiring, remote GPIO control for integration with third-party control systems, remote power-on delay and full SONICUE network control and supervision. The efficient standby power mode reduces running costs and power consumption by up to 90% compared to standard operating power — delivering a very low total cost of ownership for permanent installation applications where the amplifier may be powered continuously for extended periods.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord C1300FDi Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1300W Total Output Power:\u003c\/strong\u003e Up to 660W per channel (4Ω dual), 1100W single channel (2Ω), 2000W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Amplifier Topology:\u003c\/strong\u003e Market-leading acoustic performance and rock-solid reliability for 24\/7 permanent installation operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Premium tour-grade loudspeaker optimisation for unparalleled performance at this price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Full network control, supervision and enhanced DSP with 10-band PEQ and dedicated array processing section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Band PEQ Per Channel (SONICUE):\u003c\/strong\u003e Advanced parametric equalisation for detailed speaker and room correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Delay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V\/100V Direct Drive:\u003c\/strong\u003e High-impedance operation for distributed speaker system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 2000W into 4 Ohm for high-output single-zone applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Control:\u003c\/strong\u003e Remote interface with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LC Display:\u003c\/strong\u003e Local amplifier control and supervision without a connected PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuroblock Connectors:\u003c\/strong\u003e Convenient, professional installation wiring throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power-On Delay:\u003c\/strong\u003e System sequencing for professional installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 90% Standby Power Reduction:\u003c\/strong\u003e Very low total cost of ownership for permanent installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 104dB SNR (A-weighted):\u003c\/strong\u003e Exceptional signal-to-noise performance for professional audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57531584151925,"sku":"DYNC1300FDI","price":959.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNC1300FDI_Dynacord_F-01U-322-276_Image_1.webp?v=1787927320"},{"product_id":"dynacord-c1800fdi-dsp-power-amplifier","title":"Dynacord C1800FDi 1800W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω \/ 70V","description":"\u003ch3\u003eThe Dynacord C1800FDi is a professional 1800W 2-Channel DSP Power Amplifier with FIR Drive technology, 31-band GEQ, 10-band PEQ, 70V direct drive, GPIO control and full SONICUE software integration — stepping up from the C1300FDi with greater output power for more demanding permanent installation applications in bars, restaurants, houses of worship, sports facilities and performing arts centres.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord C1800FDi is a two-channel 1800W DSP power amplifier designed specifically for permanent installation applications requiring greater output power than the C1300FDi provides — delivering background or live music in venues including bars, churches, restaurants, sports facilities and performing arts centres with the same rock-solid German engineering, comprehensive DSP processing and professional-grade reliability that defines the C Series range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuilt on an extremely robust power supply and powerful Class AB amplifier design, the C1800FDi guarantees flawless operation even in the most demanding environments, with sophisticated protection circuitry ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C1800FDi is equipped with the same comprehensive onboard DSP platform as the rest of the C Series. FIR Drive technology optimises original factory loudspeaker settings for a level of acoustic performance typically reserved for tour-grade amplifiers. Under SONICUE Sound System Software, the C1800FDi's DSP capabilities are further elevated with 10-band parametric EQ per channel, a dedicated array processing section, 31-band graphic EQ per channel, output delay per channel, FIR filters, audio limiters and load impedance monitoring — providing a fully integrated professional speaker processing platform accessible from an intuitive software interface. A front-panel LC display allows local control and supervision without a connected PC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExceptional Power Output \u0026amp; Impedance Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C1800FDi delivers up to 850W per channel into 4 Ohm in dual-channel mode (1400W into 2 Ohm), with bridged mono operation providing up to 2800W into 4 Ohm or 1700W into 8 Ohm for demanding single-zone high-output applications. Engineered for constant stability at 2 Ohms for both channels simultaneously, the C1800FDi handles the most demanding loudspeaker loads with confidence. 70V high-impedance direct drive operation supports 2 x 1250W in dual-channel mode or 1 x 600W in bridged mode, with 100V operation available in bridged mode at 1 x 1250W — providing comprehensive flexibility across a wide range of distributed and direct-drive installation scenarios.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConnectivity \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003c\/strong\u003eThe C1800FDi features Euroblock connectors for convenient professional installation wiring, remote GPIO control via floating relay contacts for integration with third-party control systems, selectable preset selection inputs, remote power-on delay and full SONICUE network control and supervision. The efficient standby power mode reduces running costs and power consumption by up to 90% compared to standard operating power — delivering a very low total cost of ownership for permanent installation applications.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord C1800FDi Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800W Total Output Power:\u003c\/strong\u003e Up to 850W per channel (4Ω dual), 1600W single channel (2Ω), 2800W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Amplifier Topology:\u003c\/strong\u003e Market-leading acoustic performance and rock-solid reliability for 24\/7 permanent installation operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Premium tour-grade loudspeaker optimisation for unparalleled performance at this price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Full network control, supervision and enhanced DSP with 10-band PEQ and dedicated array processing section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Band PEQ Per Channel (SONICUE):\u003c\/strong\u003e Advanced parametric equalisation for detailed speaker and room correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Delay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 1250W high-impedance operation for distributed speaker system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V Operation (Bridged):\u003c\/strong\u003e 1 x 1250W bridged mode for 100V distributed system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 2800W into 4 Ohm for high-output single-zone applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Control:\u003c\/strong\u003e Floating relay contacts and preset selection inputs for third-party control system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LC Display:\u003c\/strong\u003e Local amplifier control and supervision without a connected PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuroblock Connectors:\u003c\/strong\u003e Convenient, professional installation wiring throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power-On Delay:\u003c\/strong\u003e System sequencing for professional installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 90% Standby Power Reduction:\u003c\/strong\u003e Very low total cost of ownership for permanent installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 105dB SNR (A-weighted):\u003c\/strong\u003e Exceptional signal-to-noise performance for professional audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57539100115317,"sku":"DYNC1800FDI","price":1229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNC1800FDI_Dynacord_F-01U-322-277_Image_1.webp?v=1788265910"},{"product_id":"dynacord-c2800fdi-dsp-power-amplifier","title":"Dynacord C2800FDi 2800W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord C2800FDi is a professional 2800W 2-Channel DSP Power Amplifier with FIR Drive technology, 31-band GEQ, 10-band PEQ, 70V\/100V direct drive, GPIO control and full SONICUE software integration — delivering exceptional output power and Class H efficiency for the most demanding permanent installation applications.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord C2800FDi is a two-channel 2800W DSP power amplifier designed for permanent installation applications requiring high output power, professional-grade processing and rock-solid reliability. Delivering background or live music in demanding venues including bars, churches, restaurants, sports facilities and performing arts centres, the C2800FDi combines the same comprehensive FIR Drive DSP platform and SONICUE software integration as the rest of the C Series with a significantly more powerful Class H amplifier stage — making it the ideal choice for larger zones, higher SPL requirements and installations where greater headroom and output capability are essential.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuilt on an extremely robust power supply and powerful Class H amplifier design, the C2800FDi guarantees flawless operation even in the most demanding environments, with sophisticated protection circuitry ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C2800FDi is equipped with the same comprehensive onboard DSP platform as the rest of the C Series. FIR Drive technology optimises original factory loudspeaker settings for a level of acoustic performance typically reserved for tour-grade amplifiers. Under SONICUE Sound System Software, the C2800FDi's DSP capabilities are further elevated with 10-band parametric EQ per channel, a dedicated array processing section, 31-band graphic EQ per channel, output delay per channel, FIR filters, audio limiters and load impedance monitoring — providing a fully integrated professional speaker processing platform accessible from an intuitive software interface. A front-panel LC display allows local control and supervision without a connected PC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExceptional Power Output \u0026amp; Impedance Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C2800FDi delivers up to 1400W per channel into 4 Ohm in dual-channel mode (2200W into 2 Ohm), with bridged mono operation providing up to 4400W into 4 Ohm or 2800W into 8 Ohm for the most demanding single-zone high-output applications. Engineered for constant stability at 2 Ohms for both channels simultaneously, the C2800FDi handles the most demanding loudspeaker loads with confidence. Both 70V and 100V high-impedance direct drive operation are supported — delivering 2 x 1250W at 70V and 2 x 2500W at 100V in dual-channel mode — providing comprehensive flexibility across the widest range of distributed and direct-drive installation scenarios in the C Series range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClass H Amplifier Topology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike the Class AB topology of the C1300FDi and C1800FDi, the C2800FDi utilises a Class H amplifier stage — a highly efficient topology that uses a rail-switching design to track the audio signal and supply only the voltage required at any given moment, significantly reducing heat dissipation and power consumption at typical programme levels whilst maintaining full peak output capability when demanded. This makes the C2800FDi an exceptionally efficient high-power amplifier for permanent installation applications where continuous operation and low running costs are important considerations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConnectivity \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C2800FDi features Euroblock connectors for convenient professional installation wiring, remote GPIO control for integration with third-party control systems, remote power-on delay and full SONICUE network control and supervision. The efficient standby power mode reduces running costs and power consumption significantly compared to standard operating power — delivering a very low total cost of ownership for permanent installation applications.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord C2800FDi Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2800W Total Output Power:\u003c\/strong\u003e Up to 1400W per channel (4Ω dual), 2300W single channel (2Ω), 4400W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H Amplifier Topology:\u003c\/strong\u003e Highly efficient rail-switching design for reduced heat dissipation and lower running costs at typical programme levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Premium tour-grade loudspeaker optimisation for unparalleled performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Full network control, supervision and enhanced DSP with 10-band PEQ and dedicated array processing section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Band PEQ Per Channel (SONICUE):\u003c\/strong\u003e Advanced parametric equalisation for detailed speaker and room correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Delay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 1250W high-impedance operation for distributed speaker system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 2500W — the highest 100V output capability in the C Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 4400W into 4 Ohm for the highest-output single-zone applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Control:\u003c\/strong\u003e Remote interface with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LC Display:\u003c\/strong\u003e Local amplifier control and supervision without a connected PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuroblock Connectors:\u003c\/strong\u003e Convenient, professional installation wiring throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power-On Delay:\u003c\/strong\u003e System sequencing for professional installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 107dB SNR (A-weighted):\u003c\/strong\u003e The highest signal-to-noise ratio in the C Series for exceptional audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57539162472821,"sku":"DYNC2800FDI","price":1529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNC2800FDI_Dynacord_F-01U-322-278_Image_1.webp?v=1788270336"},{"product_id":"dynacord-c3600fdi-dsp-power-amplifier","title":"Dynacord C3600FDi 3600W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω \/ 100V","description":"\u003ch3\u003eThe Dynacord C3600FDi is a professional 3600W 2-Channel DSP Power Amplifier with FIR Drive technology, 31-band GEQ, 10-band PEQ, 70V\/100V direct drive, GPIO control and full SONICUE software integration — the flagship model in the C Series, delivering the highest output power and signal-to-noise ratio in the range for the most demanding permanent installation applications.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord C3600FDi is the flagship two-channel 3600W DSP power amplifier in the C Series range — delivering the greatest output power, the highest signal-to-noise ratio and the most headroom of any model in the series for permanent installation applications where maximum performance is the priority.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDesigned for demanding venues including bars, churches, restaurants, sports facilities and performing arts centres, the C3600FDi combines the same comprehensive FIR Drive DSP platform and SONICUE software integration as the rest of the C Series with the highest-power Class H amplifier stage in the range — making it the definitive choice for the largest zones, highest SPL requirements and most demanding installations where nothing less than the best will do. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuilt on an extremely robust power supply and powerful Class H amplifier design, the C3600FDi guarantees flawless operation even in the most demanding environments, with sophisticated protection circuitry ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi is equipped with the same comprehensive onboard DSP platform as the rest of the C Series. FIR Drive technology optimises original factory loudspeaker settings for a level of acoustic performance typically reserved for tour-grade amplifiers. Under SONICUE Sound System Software, the C3600FDi's DSP capabilities are further elevated with 10-band parametric EQ per channel, a dedicated array processing section, 31-band graphic EQ per channel, output delay per channel, FIR filters, audio limiters and load impedance monitoring — providing a fully integrated professional speaker processing platform accessible from an intuitive software interface. A front-panel LC display allows local control and supervision without a connected PC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaximum Power Output \u0026amp; Impedance Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi delivers up to 1700W per channel into 4 Ohm in dual-channel mode (3000W into 2 Ohm), with bridged mono operation providing up to 6000W into 4 Ohm or 3400W into 8 Ohm — the highest bridged output power in the C Series — for the most demanding single-zone high-output applications. Engineered for constant stability at 2 Ohms for both channels simultaneously, the C3600FDi handles the most demanding loudspeaker loads with confidence. Both 70V and 100V high-impedance direct drive operation are supported — delivering 2 x 1250W at 70V and 2 x 2500W at 100V in dual-channel mode — providing comprehensive flexibility across the widest range of distributed and direct-drive installation scenarios.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClass H Amplifier Topology for Maximum Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi utilises a Class H amplifier stage — a highly efficient rail-switching topology that tracks the audio signal and supplies only the voltage required at any given moment, significantly reducing heat dissipation and power consumption at typical programme levels whilst maintaining full peak output capability when demanded. This makes the C3600FDi an exceptionally efficient high-power amplifier for permanent installation applications, delivering 3600W of total output power from just 850W of power consumption at typical programme levels.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConnectivity \u0026amp; Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe C3600FDi features Euroblock connectors for convenient professional installation wiring, remote GPIO control for integration with third-party control systems, remote power-on delay and full SONICUE network control and supervision. The efficient standby power mode reduces running costs and power consumption significantly — delivering a very low total cost of ownership for permanent installation applications where continuous operation is required.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord C3600FDi Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3600W Total Output Power:\u003c\/strong\u003e The highest output in the C Series — up to 1700W per channel (4Ω dual), 3200W single channel (2Ω), 6000W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H Amplifier Topology:\u003c\/strong\u003e Highly efficient rail-switching design for reduced heat dissipation and lower running costs at typical programme levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Premium tour-grade loudspeaker optimisation for unparalleled performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Full network control, supervision and enhanced DSP with 10-band PEQ and dedicated array processing section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Band PEQ Per Channel (SONICUE):\u003c\/strong\u003e Advanced parametric equalisation for detailed speaker and room correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Delay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 1250W high-impedance operation for distributed speaker system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V Direct Drive (Dual Channel):\u003c\/strong\u003e 2 x 2500W (-1.5dB) for high-power 100V distributed system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 6000W into 4 Ohm — the highest bridged output in the C Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO Control:\u003c\/strong\u003e Remote interface with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LC Display:\u003c\/strong\u003e Local amplifier control and supervision without a connected PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuroblock Connectors:\u003c\/strong\u003e Convenient, professional installation wiring throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power-On Delay:\u003c\/strong\u003e System sequencing for professional installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 109dB SNR (A-weighted):\u003c\/strong\u003e The highest signal-to-noise ratio in the C Series for exceptional audio clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57539260776821,"sku":"DYNC3600FDI","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNC3600FDI_Dynacord_F-01U-322-279_Image_1.webp?v=1788271933"},{"product_id":"dynacord-l1300fd-live-series-dsp-power-amplifier","title":"Dynacord L1300FD Live Series 1300W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω","description":"\u003ch3\u003eThe Dynacord L1300FD is a professional Live Series 1300W DSP Power Amplifier with FIR Drive technology, multi-band PEQ, GEQ, crossover, delay and full SONICUE software integration — engineered in Germany for demanding live music applications in music clubs, performance centres, community venues and sports facilities.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord L1300FD is the entry-level model in the L Series range of professional live sound DSP power amplifiers — engineered specifically for demanding live music applications and designed for performing musicians, live sound engineers and production companies providing sound reinforcement in music clubs, community hall events, performance centres and sports venues. Bringing a best-in-class, tour-grade feature set to a genuinely accessible price point, the L1300FD combines truly professional processing power and performance characteristics with the rock-solid German engineering and reliable build quality that Dynacord is renowned for in professional live sound.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike the C Series which is optimised for permanent installation, the L1300FD is purpose-built for the demands of live touring and mobile production — featuring standard XLR inputs and link outputs, a front-panel display screen and manual power switch for fast, practical control on the road. Equipped with an extremely robust power supply and powerful Class AB amplifier design, flawless operation is guaranteed even in the most demanding live environments, with a sophisticated protection circuit ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L1300FD is equipped with comprehensive onboard DSP including multi-band parametric EQ, crossovers, limiters and delay per channel, alongside true channel grouping control with additional PEQ, GEQ and delay available per group — providing the kind of flexible, professional processing capability normally found only in high-end tour-grade DSP processors. FIR Drive technology — a proprietary premium feature typically reserved for the highest quality tour-grade DSPs — optimises loudspeaker performance and delivers a level of acoustic precision that is simply unheard of at this price point. Full SONICUE Sound System Software support enables intuitive setup, comprehensive control and system supervision from a connected device.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePowerful Output \u0026amp; True 2 Ohm Stability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L1300FD delivers up to 600W per channel into 4 Ohm in dual-channel mode (1000W into 2 Ohm), with bridged mono operation providing up to 2000W into 4 Ohm or 1200W into 8 Ohm for demanding single-speaker high-output applications. Engineered for true stability at 2 Ohms for both channels simultaneously, the L1300FD handles the most demanding loudspeaker loads with confidence — providing the headroom and reliability that live sound professionals demand from a touring amplifier.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord L1300FD Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1300W Total Output Power:\u003c\/strong\u003e Up to 600W per channel (4Ω dual), 1100W single channel (2Ω), 2000W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Amplifier Topology:\u003c\/strong\u003e Market-leading acoustic performance and rock-solid reliability for demanding live applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Proprietary premium tour-grade loudspeaker optimisation for exceptional acoustic performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Intuitive setup, flexible control and comprehensive system supervision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Band PEQ Per Channel:\u003c\/strong\u003e Professional parametric equalisation for precise loudspeaker and system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGEQ \u0026amp; Crossover Per Channel:\u003c\/strong\u003e Comprehensive graphic EQ and crossover processing for flexible system configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay Per Channel:\u003c\/strong\u003e Time alignment for complex multi-speaker live sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Channel Grouping Control:\u003c\/strong\u003e Additional PEQ, GEQ and delay per group for advanced system management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLR Inputs \u0026amp; Link Outputs:\u003c\/strong\u003e Standard live-sound connectivity for fast, practical setup on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Display \u0026amp; Manual Power Switch:\u003c\/strong\u003e Quick, intuitive local control for live touring and mobile production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 2000W into 4 Ohm for high-output single-speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 104dB SNR (A-weighted):\u003c\/strong\u003e Exceptional signal-to-noise performance for professional live audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for sustained high-power live performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection Suite:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, back-EMF, peak current, inrush current and turn-on delay protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57539505914229,"sku":"DYNL1300FD","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNL1300FD_Dynacord_F-01U-322-272_Image_1.webp?v=1788339033"},{"product_id":"dynacord-l1800fd-live-series-dsp-power-amplifier","title":"Dynacord L1800FD Live Series 1800W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω","description":"\u003ch3\u003eThe Dynacord L1800FD is a professional Live Series 1800W DSP Power Amplifier with FIR Drive technology, 31-band GEQ, multi-band PEQ, crossover, delay and full SONICUE software integration — stepping up from the L1300FD with greater output power for more demanding live music applications in music clubs, performance centres, community venues and sports facilities.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord L1800FD is a two-channel 1800W DSP power amplifier in the L Series range — sharing the same tour-grade feature set, FIR Drive DSP platform and rock-solid German engineering as the L1300FD, but stepping up to 1800W of total output power for live sound applications where greater headroom, higher SPL and more demanding loudspeaker loads require additional amplification capability. Designed for performing musicians, live sound engineers and production companies providing sound reinforcement in music clubs, community hall events, performance centres and sports venues, the L1800FD delivers truly professional processing power and performance at an accessible price point. Equipped with an extremely robust power supply and powerful Class AB amplifier design, flawless operation is guaranteed even in the most demanding live environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike the C Series which is optimised for permanent installation, the L1800FD is purpose-built for the demands of live touring and mobile production — featuring standard XLR inputs and link outputs, a front-panel display screen and manual power switch for fast, practical control on the road.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L1800FD is equipped with comprehensive onboard DSP including 31-band graphic EQ per channel, multi-band parametric EQ per channel, crossovers, limiters and delay per channel, alongside true channel grouping control with additional PEQ, GEQ and delay available per group. FIR Drive technology — a proprietary premium feature typically reserved for the highest quality tour-grade DSPs — optimises loudspeaker performance and delivers a level of acoustic precision unheard of at this price point. Full SONICUE Sound System Software support enables intuitive setup, comprehensive control and system supervision from a connected device.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePowerful Output \u0026amp; True 2 Ohm Stability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L1800FD delivers up to 850W per channel into 4 Ohm in dual-channel mode (1400W into 2 Ohm), with bridged mono operation providing up to 2800W into 4 Ohm or 1700W into 8 Ohm for demanding single-speaker high-output applications. Engineered for true stability at 2 Ohms for both channels simultaneously, the L1800FD handles the most demanding loudspeaker loads with confidence — providing the headroom and reliability that live sound professionals demand from a touring amplifier.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord L1800FD Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800W Total Output Power:\u003c\/strong\u003e Up to 850W per channel (4Ω dual), 1600W single channel (2Ω), 2800W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Amplifier Topology:\u003c\/strong\u003e Market-leading acoustic performance and rock-solid reliability for demanding live applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Proprietary premium tour-grade loudspeaker optimisation for exceptional acoustic performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Intuitive setup, flexible control and comprehensive system supervision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise loudspeaker and system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Band PEQ Per Channel:\u003c\/strong\u003e Professional parametric equalisation for detailed system and speaker correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover \u0026amp; Delay Per Channel:\u003c\/strong\u003e Flexible system configuration and time alignment for complex live sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Channel Grouping Control:\u003c\/strong\u003e Additional PEQ, GEQ and delay per group for advanced system management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLR Inputs \u0026amp; Link Outputs:\u003c\/strong\u003e Standard live-sound connectivity for fast, practical setup on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Display \u0026amp; Manual Power Switch:\u003c\/strong\u003e Quick, intuitive local control for live touring and mobile production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 2800W into 4 Ohm for high-output single-speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 105dB SNR (A-weighted):\u003c\/strong\u003e Exceptional signal-to-noise performance for professional live audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for sustained high-power live performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection Suite:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, back-EMF, peak current, inrush current and turn-on delay protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57541475369333,"sku":"DYNL1800FD","price":869.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNL1800FD_Dynacord_F-01U-322-273_Image_1.webp?v=1788341937"},{"product_id":"dynacord-l2800fd-live-series-dsp-power-amplifier","title":"Dynacord L2800FD Live Series 2800W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω","description":"\u003ch3\u003eThe Dynacord L2800FD is a professional Live Series 2800W DSP Power Amplifier with FIR Drive technology, 31-band GEQ, multi-band PEQ, crossover, delay and full SONICUE software integration — delivering Class H efficiency and exceptional output power for the most demanding live music applications in larger venues and professional touring environments.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Dynacord \u003c\/span\u003e\u003cspan\u003eL2800FD is a \u003c\/span\u003e\u003cspan\u003etwo-channel 2800W DSP \u003c\/span\u003e\u003cspan\u003epower amplifier in \u003c\/span\u003e\u003cspan\u003ethe L Series range — \u003c\/span\u003e\u003cspan\u003estepping up \u003c\/span\u003e\u003cspan\u003esignificantly from \u003c\/span\u003e\u003cspan\u003ethe L1800FD with a \u003c\/span\u003e\u003cspan\u003emore powerful Class H \u003c\/span\u003e\u003cspan\u003eamplifier stage, \u003c\/span\u003e\u003cspan\u003egreater output power \u003c\/span\u003e\u003cspan\u003eand higher \u003c\/span\u003e\u003cspan\u003esignal-to-noise ratio \u003c\/span\u003e\u003cspan\u003efor live sound \u003c\/span\u003e\u003cspan\u003eapplications where \u003c\/span\u003e\u003cspan\u003emaximum headroom, \u003c\/span\u003e\u003cspan\u003ehigh SPL and \u003c\/span\u003e\u003cspan\u003edemanding loudspeaker \u003c\/span\u003e\u003cspan\u003eloads are the \u003c\/span\u003e\u003cspan\u003epriority. Designed \u003c\/span\u003e\u003cspan\u003efor performing \u003c\/span\u003e\u003cspan\u003emusicians, live sound \u003c\/span\u003e\u003cspan\u003eengineers and \u003c\/span\u003e\u003cspan\u003eproduction companies \u003c\/span\u003e\u003cspan\u003eproviding sound \u003c\/span\u003e\u003cspan\u003ereinforcement in \u003c\/span\u003e\u003cspan\u003elarger music clubs, \u003c\/span\u003e\u003cspan\u003eperformance centres, \u003c\/span\u003e\u003cspan\u003ecommunity events and \u003c\/span\u003e\u003cspan\u003esports venues, the \u003c\/span\u003e\u003cspan\u003eL2800FD delivers the \u003c\/span\u003e\u003cspan\u003ekind of power and \u003c\/span\u003e\u003cspan\u003eprocessing capability \u003c\/span\u003e\u003cspan\u003ethat professional \u003c\/span\u003e\u003cspan\u003etouring demands — at \u003c\/span\u003e\u003cspan\u003ea price point that \u003c\/span\u003e\u003cspan\u003emakes it genuinely \u003c\/span\u003e\u003cspan\u003eaccessible for a \u003c\/span\u003e\u003cspan\u003ewider range of \u003c\/span\u003e\u003cspan\u003eproductions. Equipped \u003c\/span\u003e\u003cspan\u003ewith an extremely \u003c\/span\u003e\u003cspan\u003erobust power supply \u003c\/span\u003e\u003cspan\u003eand powerful Class H \u003c\/span\u003e\u003cspan\u003eamplifier design, \u003c\/span\u003e\u003cspan\u003eflawless operation is \u003c\/span\u003e\u003cspan\u003eguaranteed even in \u003c\/span\u003e\u003cspan\u003ethe most demanding \u003c\/span\u003e\u003cspan\u003elive environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnlike the C Series \u003c\/span\u003e\u003cspan\u003ewhich is optimised \u003c\/span\u003e\u003cspan\u003efor permanent \u003c\/span\u003e\u003cspan\u003einstallation, the \u003c\/span\u003e\u003cspan\u003eL2800FD is \u003c\/span\u003e\u003cspan\u003epurpose-built for the \u003c\/span\u003e\u003cspan\u003edemands of live \u003c\/span\u003e\u003cspan\u003etouring and mobile \u003c\/span\u003e\u003cspan\u003eproduction — \u003c\/span\u003e\u003cspan\u003efeaturing standard \u003c\/span\u003e\u003cspan\u003eXLR inputs and link \u003c\/span\u003e\u003cspan\u003eoutputs, a \u003c\/span\u003e\u003cspan\u003efront-panel display \u003c\/span\u003e\u003cspan\u003escreen and manual \u003c\/span\u003e\u003cspan\u003epower switch for \u003c\/span\u003e\u003cspan\u003efast, practical \u003c\/span\u003e\u003cspan\u003econtrol on the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003eL2800FD is equipped \u003c\/span\u003e\u003cspan\u003ewith comprehensive \u003c\/span\u003e\u003cspan\u003eonboard DSP including \u003c\/span\u003e\u003cspan\u003e31-band graphic EQ \u003c\/span\u003e\u003cspan\u003eper channel, \u003c\/span\u003e\u003cspan\u003emulti-band parametric \u003c\/span\u003e\u003cspan\u003eEQ per channel, \u003c\/span\u003e\u003cspan\u003ecrossovers, limiters \u003c\/span\u003e\u003cspan\u003eand delay per \u003c\/span\u003e\u003cspan\u003echannel, alongside \u003c\/span\u003e\u003cspan\u003etrue channel grouping \u003c\/span\u003e\u003cspan\u003econtrol with \u003c\/span\u003e\u003cspan\u003eadditional PEQ, GEQ \u003c\/span\u003e\u003cspan\u003eand delay available \u003c\/span\u003e\u003cspan\u003eper group. FIR Drive \u003c\/span\u003e\u003cspan\u003etechnology — a \u003c\/span\u003e\u003cspan\u003eproprietary premium \u003c\/span\u003e\u003cspan\u003efeature typically \u003c\/span\u003e\u003cspan\u003ereserved for the \u003c\/span\u003e\u003cspan\u003ehighest quality \u003c\/span\u003e\u003cspan\u003etour-grade DSPs — \u003c\/span\u003e\u003cspan\u003eoptimises loudspeaker \u003c\/span\u003e\u003cspan\u003eperformance for a \u003c\/span\u003e\u003cspan\u003elevel of acoustic \u003c\/span\u003e\u003cspan\u003eprecision unheard of \u003c\/span\u003e\u003cspan\u003eat this price point. \u003c\/span\u003e\u003cspan\u003eFull SONICUE Sound \u003c\/span\u003e\u003cspan\u003eSystem Software \u003c\/span\u003e\u003cspan\u003esupport enables \u003c\/span\u003e\u003cspan\u003eintuitive setup, \u003c\/span\u003e\u003cspan\u003ecomprehensive control \u003c\/span\u003e\u003cspan\u003eand system \u003c\/span\u003e\u003cspan\u003esupervision from a \u003c\/span\u003e\u003cspan\u003econnected device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan\u003eClass H Efficiency \u0026amp; True 2 Ohm Stability\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe L2800FD \u003c\/span\u003e\u003cspan\u003eutilises a Class H \u003c\/span\u003e\u003cspan\u003eamplifier stage — a \u003c\/span\u003e\u003cspan\u003ehighly efficient \u003c\/span\u003e\u003cspan\u003erail-switching \u003c\/span\u003e\u003cspan\u003etopology that tracks \u003c\/span\u003e\u003cspan\u003ethe audio signal and \u003c\/span\u003e\u003cspan\u003esupplies only the \u003c\/span\u003e\u003cspan\u003evoltage required at \u003c\/span\u003e\u003cspan\u003eany given moment, \u003c\/span\u003e\u003cspan\u003ereducing heat \u003c\/span\u003e\u003cspan\u003edissipation and power \u003c\/span\u003e\u003cspan\u003econsumption at typical programme levels whilst maintaining full peak output capability when demanded. The L2800FD delivers up to 1300W per channel into 4 Ohm in dual-channel mode (2200W \u003c\/span\u003e\u003cspan\u003einto 2 Ohm), with \u003c\/span\u003e\u003cspan\u003ebridged mono \u003c\/span\u003e\u003cspan\u003eoperation providing \u003c\/span\u003e\u003cspan\u003eup to 4400W into 4 \u003c\/span\u003e\u003cspan\u003eOhm or 2600W into 8 \u003c\/span\u003e\u003cspan\u003eOhm for the most \u003c\/span\u003e\u003cspan\u003edemanding \u003c\/span\u003e\u003cspan\u003esingle-speaker \u003c\/span\u003e\u003cspan\u003eapplications. \u003c\/span\u003e\u003cspan\u003eEngineered for true \u003c\/span\u003e\u003cspan\u003estability at 2 Ohms \u003c\/span\u003e\u003cspan\u003efor both channels \u003c\/span\u003e\u003cspan\u003esimultaneously, the \u003c\/span\u003e\u003cspan\u003eL2800FD handles the \u003c\/span\u003e\u003cspan\u003emost demanding \u003c\/span\u003e\u003cspan\u003eprofessional \u003c\/span\u003e\u003cspan\u003eloudspeaker loads \u003c\/span\u003e\u003cspan\u003ewith confidence.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord L2800FD Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2800W Total Output Power:\u003c\/strong\u003e Up to 1300W per channel (4Ω dual), 2300W single channel (2Ω), 4400W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H Amplifier Topology:\u003c\/strong\u003e Highly efficient rail-switching design for reduced heat dissipation at typical programme levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Proprietary premium tour-grade loudspeaker optimisation for exceptional acoustic performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Intuitive setup, flexible control and comprehensive system supervision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise loudspeaker and system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Band PEQ Per Channel:\u003c\/strong\u003e Professional parametric equalisation for detailed system and speaker correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover \u0026amp; Delay Per Channel:\u003c\/strong\u003e Flexible system configuration and time alignment for complex live sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Channel Grouping Control:\u003c\/strong\u003e Additional PEQ, GEQ and delay per group for advanced system management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLR Inputs \u0026amp; Link Outputs:\u003c\/strong\u003e Standard live-sound connectivity for fast, practical setup on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Display \u0026amp; Manual Power Switch:\u003c\/strong\u003e Quick, intuitive local control for live touring and mobile production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 4400W into 4 Ohm for high-output single-speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 107dB SNR (A-weighted):\u003c\/strong\u003e Exceptional signal-to-noise performance for professional live audio quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for sustained high-power live performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection Suite:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, back-EMF, peak current, inrush current and turn-on delay protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57541496865141,"sku":"DYNL2800FD","price":999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNL2800FD_Dynacord_F-01U-322-274_Image_1.webp?v=1788342273"},{"product_id":"dynacord-l3600fd-live-series-dsp-power-amplifier","title":"Dynacord L3600FD Live Series 3600W 2-Channel DSP Power Amplifier 2Ω \/ 4Ω \/ 8Ω","description":"\u003ch3\u003eThe Dynacord L3600FD is the flagship Live Series 3600W DSP Power Amplifier with FIR Drive technology, 31-band GEQ, multi-band PEQ, crossover, delay and full SONICUE software integration — delivering the highest output power and signal-to-noise ratio in the L Series for the most demanding professional live sound and touring applications.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord L3600FD is the flagship two-channel 3600W DSP power amplifier in the L Series range — delivering the greatest output power, the highest signal-to-noise ratio and the most headroom of any model in the series for the most demanding professional live sound applications. Designed for performing musicians, live sound engineers and production companies providing high-output sound reinforcement in larger music clubs, performance centres, sports venues and touring productions, the L3600FD brings the full capability of a tour-grade professional amplifier to a genuinely accessible price point. Equipped with an extremely robust power supply and powerful Class H amplifier design, flawless operation is guaranteed even in the most demanding live environments, with a sophisticated protection circuit ensuring safe and reliable operation under all conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eUnlike the C Series which is optimised for permanent installation, the L3600FD is purpose-built for the demands of live touring and mobile production — featuring standard XLR inputs and link outputs, a front-panel display screen and manual power switch for fast, practical control on the road.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2S3bbE0QD7U?si=lbRRSir51WXjAnzR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFIR Drive \u0026amp; SONICUE DSP Processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L3600FD is equipped with comprehensive onboard DSP including 31-band graphic EQ per channel, multi-band parametric EQ per channel, crossovers, limiters and delay per channel, alongside true channel grouping control with additional PEQ, GEQ and delay available per group. FIR Drive technology — a proprietary premium feature typically reserved for the highest quality tour-grade DSPs — optimises loudspeaker performance for a level of acoustic precision that is simply unheard of at this price point. Full SONICUE Sound System Software support enables intuitive setup, comprehensive control and system supervision from a connected device.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaximum Power Output \u0026amp; Class H Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe L3600FD delivers up to 1700W per channel into 4 Ohm in dual-channel mode (3000W into 2 Ohm), with bridged mono operation providing up to 6000W into 4 Ohm or 3400W into 8 Ohm — the highest bridged output power in the L Series — for the most demanding single-speaker high-output applications. The Class H amplifier topology tracks the audio signal and supplies only the voltage required at any given moment, significantly reducing heat dissipation and power consumption at typical programme levels whilst maintaining full peak output capability when demanded. Engineered for true stability at 2 Ohms for both channels simultaneously, the L3600FD handles the most demanding professional loudspeaker loads with confidence — delivering 3600W of total output power from just 850W of power consumption at typical programme levels.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord L3600FD Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3600W Total Output Power:\u003c\/strong\u003e The highest output in the L Series — up to 1700W per channel (4Ω dual), 3200W single channel (2Ω), 6000W bridged (4Ω).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass H Amplifier Topology:\u003c\/strong\u003e Highly efficient rail-switching design for reduced heat dissipation and lower power consumption at typical programme levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2 Ohm Stability:\u003c\/strong\u003e Constant, reliable operation at 2 Ohm load on both channels simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Drive Technology:\u003c\/strong\u003e Proprietary premium tour-grade loudspeaker optimisation for exceptional acoustic performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE Sound System Software Integration:\u003c\/strong\u003e Intuitive setup, flexible control and comprehensive system supervision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band GEQ Per Channel:\u003c\/strong\u003e Comprehensive graphic equalisation for precise loudspeaker and system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Band PEQ Per Channel:\u003c\/strong\u003e Professional parametric equalisation for detailed system and speaker correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover \u0026amp; Delay Per Channel:\u003c\/strong\u003e Flexible system configuration and time alignment for complex live sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue Channel Grouping Control:\u003c\/strong\u003e Additional PEQ, GEQ and delay per group for advanced system management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLR Inputs \u0026amp; Link Outputs:\u003c\/strong\u003e Standard live-sound connectivity for fast, practical setup on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Display \u0026amp; Manual Power Switch:\u003c\/strong\u003e Quick, intuitive local control for live touring and mobile production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Mono Operation:\u003c\/strong\u003e Up to 6000W into 4 Ohm — the highest bridged output in the L Series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026gt; 109dB SNR (A-weighted):\u003c\/strong\u003e The highest signal-to-noise ratio in the L Series for exceptional audio clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt; 0.05% THD:\u003c\/strong\u003e Ultra-low distortion for transparent, accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Stage Front-to-Rear Fan Cooling:\u003c\/strong\u003e Reliable thermal management for sustained high-power live performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Protection Suite:\u003c\/strong\u003e Audio limiters, thermal, DC, HF, back-EMF, peak current, inrush current and turn-on delay protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Engineering:\u003c\/strong\u003e Designed and engineered in Germany to the highest professional standards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57541587272053,"sku":"DYNL3600FD","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/DYNL3600FD_Dynacord_F-01U-322-275_Image_1.webp?v=1788343500"},{"product_id":"dynacord-vzx-8-8-zone-audio-processor","title":"Dynacord VZX-8 8-Zone Audio Processor \u0026 Matrix with DSP \u0026 Virtual Mixer","description":"\u003ch3\u003eThe Dynacord VZX-8 is an 8-Zone Audio Processor and Matrix with 20 processed input sources, full matrix DSP including FIR speaker EQ, Virtual Mixer with Automixer, ANC and AGC, 32GB MicroSD media storage and RJ45 accessory ports — the core processor of the Dynacord V Series Zone Audio Platform for commercial background music, paging and messaging installations.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Complete Zone Audio Platform for Commercial Installations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord VZX-8 sits at the heart of the V Series Zone Audio Platform — a self-contained, cost-effective and comprehensively specified solution for commercial zone audio installations handling background music, paging and messaging with maximum ease and flexibility. Designed to eliminate the complexity of juggling separate DSPs, accessories and amplifiers that don't communicate effectively with each other, the V Series platform brings together the VZX-8 processor, VCS-8 Call Station, VWP Wall Panel Controllers and V Series power amplifiers into a cohesive, integrated system that is fast to set up, easy to manage and highly flexible for the diverse needs of commercial fixed installations across hospitality, retail, education, corporate and public venue environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qy5o9bQ5ycE?si=OFvB8U8_a5HyrXOD\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e20 Processed Input Sources \u0026amp; Full Matrix DSP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VZX-8 provides 20 processed input sources — including 8 balanced mic\/line inputs via Euroblock connectors with mic preamps, 4 RCA inputs summed to mono and 8 digital sources from the onboard media and message players — routable in any combination to any of the 8 processed zone outputs via full matrix DSP. Any input can be assigned to any zone output, with comprehensive per-input and per-output processing including dedicated HPF, 4-band parametric EQ, noise gate, compressor, AGC, VOX ducker and trim per input, alongside 5-band room EQ per output. FIR speaker EQ with 10-band custom processing and access to the full Electro-Voice, Dynacord and generic loudspeaker databases — or imported SONICUE speaker databases — allows installers to instantly maximise system performance with factory-optimised loudspeaker presets. An output delay of up to 150ms per zone provides time alignment for complex multi-zone and distributed speaker system configurations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVirtual Mixer with Automixer \u0026amp; FX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VZX-8's onboard Virtual Mixer provides full live mixing capability for all mic\/line inputs directly within the processor — with an integrated Automixer (AMM) that intelligently manages microphone levels automatically in conferencing and speech reinforcement applications, reducing background noise and feedback without manual intervention. A built-in FX engine provides reverb, echo, delay, chorus and combination effects with independent level control per input, adding a further dimension of flexibility for live event and presentation applications within a commercial installation environment. ANC (Automatic Noise Compensation) and AGC (Automatic Gain Control) further automate the management of microphone and input levels for consistent, professional results without constant manual adjustment.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOnboard Media Player, Message Player \u0026amp; 32GB MicroSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VZX-8 includes a 32GB MicroSD card for storing music, messages and configuration files directly within the processor — enabling standalone background music playback and scheduled message broadcasting without any external media source. The media and message player provides 8 mono or 4 stereo digital sources routable to any zone, and 300MB of internal storage provides additional capacity for configuration and message file storage.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVZX Web App — Browser-Based System Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VZX-8 is configured and managed via the VZX Web App — an adaptive web application accessible from any device with a browser, requiring no additional software installation. System setup, zone audio configuration, messaging, paging and wall panel management can be completed in minutes, with copy and paste functions on processing blocks to accelerate multi-zone configurations. The app provides full matrix DSP visibility, input routing, zone creation, output adjustment and speaker settings in a single intuitive interface, with multiple configuration language support for international installations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRJ45 Accessory Ports \u0026amp; System Expandability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTwo RJ45 accessory ports support reliable connection of up to 8 accessories per port — 16 devices total — with cable lengths of up to 500m per port, providing extensive installation flexibility for large-scale distributed commercial environments. Up to 8 VCS-8 Call Stations can be connected for paging and announcement capability, and VWP Wall Panel Controllers provide local level, zone and source control with display at each zone location. Line outputs are available via both Euroblock (8 outputs) and RJ45 (2 x RJ45 LINE OUT 1-4\/5-8) for direct connection to V Series amplifiers via AES72-1E, alongside 8 freely assignable GPIO inputs\/outputs for third-party control system integration.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord VZX-8 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 Zone Outputs \u0026amp; 20 Processed Input Sources:\u003c\/strong\u003e Full matrix DSP routing — any input to any zone output for maximum system flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 Balanced Mic\/Line Inputs:\u003c\/strong\u003e Euroblock, balanced, with mic preamps for microphone and line-level source connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Matrix DSP:\u003c\/strong\u003e Input EQ, compression, AGC, noise gate, FX, VOX ducker, room EQ, speaker EQ with FIR and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIR Speaker EQ with Loudspeaker Presets:\u003c\/strong\u003e Instant access to full EV, Dynacord and third-party loudspeaker databases via SONICUE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtual Mixer with Automixer (AMM):\u003c\/strong\u003e Full live mixing capability with intelligent automatic microphone management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In FX Engine:\u003c\/strong\u003e Reverb, echo, delay, chorus and combinations with level per input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANC \u0026amp; AGC:\u003c\/strong\u003e Automatic noise compensation and gain control for consistent, professional microphone management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32GB MicroSD Card Included:\u003c\/strong\u003e Onboard storage for music, messages and configuration files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Media \u0026amp; Message Player:\u003c\/strong\u003e 8 mono or 4 stereo digital sources for background music and scheduled messaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVZX Web App:\u003c\/strong\u003e Browser-based system configuration and control — no additional software required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x RJ45 Accessory Ports:\u003c\/strong\u003e Up to 16 devices, 500m cable length per port for large-scale distributed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 8 VCS-8 Call Stations:\u003c\/strong\u003e Expandable paging and announcement capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVWP Wall Panel Controller Compatible:\u003c\/strong\u003e Local level, zone and source control at each zone location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 x GPIO:\u003c\/strong\u003e Freely assignable as inputs or outputs for third-party control system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRJ45 Line Outputs:\u003c\/strong\u003e Direct connection to V Series amplifiers via AES72-1E.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150ms Maximum Output Delay:\u003c\/strong\u003e Per-zone time alignment for complex distributed speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 x Euroblock Line Outputs:\u003c\/strong\u003e Professional installation wiring for zone speaker system connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMG Override Input:\u003c\/strong\u003e Emergency message override for life safety and building system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48kHz Sample Rate:\u003c\/strong\u003e Professional audio processing throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCP\/IP Network Control:\u003c\/strong\u003e HTTP(s), JSON RPC, WebSocket and OCA network protocol support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore of the Dynacord V Series Platform:\u003c\/strong\u003e Works seamlessly with VCS-8 Call Stations, VWP Wall Panel Controllers and V Series power amplifiers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57545451241845,"sku":"DYNVZX8","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/WEBDYN00099_VZX8_1.webp?v=1788433896"},{"product_id":"dynacord-vwp-wall-panel-controller","title":"Dynacord VWP Wall Panel Controller with 1.77\" Colour Display - Black \u0026 White Fascia","description":"\u003ch3\u003eThe Dynacord VWP is a Wall Panel Controller with a 1.77\" colour TFT display and rotary encoder providing level, zone, source and media playback control — daisy-chainable up to 16 units, supplied with both black and white interchangeable fascias and powered directly from the VZX-8 accessory bus for seamless integration into the Dynacord V Series Zone Audio Platform.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord VWP Wall Panel Controller is the local user interface component of the V Series Zone Audio Platform — providing intuitive, easy-to-use control of audio levels, zones, sources and media playback directly from any room or zone location within a commercial installation. Designed to work seamlessly with the VZX-8 Zone Audio Processor, the VWP connects directly to the VZX-8's accessory bus via RJ45 and is powered by the same connection — eliminating the need for separate power supplies or complex wiring at each controller location. Up to 16 VWP controllers can be connected to a single VZX-8 processor via daisy chain, providing local control at every zone in even the most extensive commercial installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qy5o9bQ5ycE?si=OFvB8U8_a5HyrXOD\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClear Colour TFT Display \u0026amp; Rotary Encoder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VWP features an easy-to-read 1.77\" colour TFT display at 160 x 128 pixel resolution with 480cd\/m² brightness — providing clear, legible system status and control information in any ambient lighting condition. A 24-detent 360° continuous push-button rotary encoder provides smooth, precise and intuitive control of level, mute, zone, source and media player functions, with a user-friendly interface that requires minimal training for day-to-day operation by non-technical staff. Unicode support for over 150 languages ensures the VWP can display system information and labels in any language required for international and multilingual commercial environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFlexible Access Control \u0026amp; Security\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VWP can be configured with a 4-digit PIN lock and multiple user profiles providing different levels of access — allowing system administrators to restrict certain controls or functions to authorised users whilst giving general users access to the everyday level and source controls they need. This makes the VWP particularly practical in commercial environments such as hotels, restaurants and retail spaces where the audio system may be accessed by multiple staff members with different responsibilities.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAesthetic Flexibility \u0026amp; Simple Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VWP's front panel is available in white as standard and is interchangeable to black — ensuring aesthetic flexibility to match any interior décor without the need to order a different model. Wall mounting uses a standard 60mm diameter electrical back box (minimum 60mm deep) alongside a standard 1-gang Decora wall plate available from any electrical supply store, keeping installation hardware costs to a minimum. The VWP's daisy-chain RJ45 in and out connectors allow multiple controllers to be connected in sequence using standard CAT cable, with CAN termination plugs provided for correct bus termination at the last device on each accessory line.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord VWP Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.77\" Colour TFT Display:\u003c\/strong\u003e 160 x 128 pixel, 480cd\/m² brightness — clear and legible in any ambient lighting condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Detent Rotary Encoder:\u003c\/strong\u003e Smooth, precise and intuitive control of level, mute, zone, source and media playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel, Zone, Source \u0026amp; Media Playback Control:\u003c\/strong\u003e Complete local audio system management from any room or zone location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered by VZX-8 Accessory Bus:\u003c\/strong\u003e No separate power supply required — RJ45 connection provides both data and power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaisy-Chainable — Up to 16 Units:\u003c\/strong\u003e Connect up to 16 VWP controllers to a single VZX-8 processor via standard CAT cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Digit PIN Lock \u0026amp; User Profiles:\u003c\/strong\u003e Configurable access control for multi-user commercial environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnicode Support for 150+ Languages:\u003c\/strong\u003e Multilingual display support for international commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with Black \u0026amp; White Interchangeable Fascias:\u003c\/strong\u003e Both colour options included as standard — no need to order separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical Back Box Mounting:\u003c\/strong\u003e Compatible with standard 60mm diameter back boxes and 1-gang Decora wall plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRJ45 In \u0026amp; Out Connectors:\u003c\/strong\u003e Daisy-chain connectivity with included CAN termination plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature +5°C to +40°C:\u003c\/strong\u003e Suitable for a wide range of commercial indoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless V Series Integration:\u003c\/strong\u003e Designed specifically for use with the Dynacord VZX-8 Zone Audio Processor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57545504096629,"sku":"DYNVWP","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/WEBDYN00101_VWP_1.webp?v=1788436223"},{"product_id":"dynacord-vcs-8-8-zone-gooseneck-paging-microphone-station","title":"Dynacord VCS-8 8-Zone Gooseneck Paging Microphone Station","description":"\u003ch3\u003eThe Dynacord VCS-8 is an 8-Zone Gooseneck Paging Microphone Station with 9 freely programmable buttons, RGB LED busy indication, customisable priority settings and daisy-chain support for up to 8 units — designed for seamless integration with the VZX-8 Zone Audio Processor for clear, reliable paging and announcement control in commercial installations.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Dynacord VCS-8 is a robust and versatile call station designed for seamless integration with the Dynacord V Series Zone Audio Platform — providing clear, reliable and easily managed paging and announcement capability across any number of zones in a commercial installation. Powered and connected directly via the VZX-8's accessory bus, the VCS-8 requires no separate power supply and connects using standard CAT cable for straightforward, cost-effective installation. Up to 8 VCS-8 units can be connected to a single VZX-8 processor via daisy chain, providing paging capability from multiple locations throughout a venue — and up to 4 active pages can occur simultaneously when assigned to different zones, enabling efficient multi-zone communication management in larger commercial environments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qy5o9bQ5ycE?si=OFvB8U8_a5HyrXOD\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e9 Freely Programmable Buttons for Flexible Zone Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VCS-8 features 9 freely programmable buttons that can be configured to page individual zones, groups of zones or the entire system — or assigned to control other system functions for customised operation tailored to the specific requirements of each installation. Each of the 8 zone buttons has a dedicated LED indicator showing zone status, with a ninth assignable button for all-zone paging or additional control functions. A push-to-talk activation model ensures announcements are made intentionally and clearly. Customisable priority settings, mutual exclusion functionality and an RGB LED light ring busy indication ensure organised and efficient communication management — preventing conflicting announcements and clearly indicating to the user when the system is busy with an active page.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHigh-Quality Gooseneck Condenser Microphone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VCS-8 is equipped with a high-quality unidirectional electret condenser gooseneck microphone — powered directly by the VZX-8 accessory bus — with a frequency response of 100Hz to 14kHz, a maximum acoustic input level of 120dB SPL, a dynamic range of greater than 90dB and a signal-to-noise ratio of 70dBA for clear, intelligible voice transmission in any announcement or paging application. An input gain range of 0 to 60dB and a CMRR of typically 50dB at 1kHz ensure clean, consistent microphone performance across a wide range of installation environments and acoustic conditions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDurable Construction \u0026amp; Practical Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VCS-8 is built for the rigours of daily use in demanding commercial environments. The heavy-duty Zamak base provides exceptional stability and longevity on any tabletop or desk surface, whilst the PC\/ABS top housing ensures a professional, durable appearance. A label tray in Pearl Light Grey provides a practical area for zone and function labelling, making the VCS-8 straightforward for staff to operate without confusion. Daisy-chain RJ45 in and out connectors allow multiple call stations to be connected in sequence using standard CAT cable, with CAN termination plugs provided for correct bus termination at the last device on each accessory line.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDynacord VCS-8 Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 Freely Programmable Buttons:\u003c\/strong\u003e Page individual zones, groups, all zones or control other system functions — fully configurable per installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 Zone LED Indicators:\u003c\/strong\u003e Dedicated LED per zone plus one assignable indicator for all-zone or control function status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Light Ring Busy Indication:\u003c\/strong\u003e Clear visual indication when the system is active with an ongoing page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-to-Talk Operation:\u003c\/strong\u003e Intentional, clear announcement activation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Gooseneck Condenser Microphone:\u003c\/strong\u003e Unidirectional electret condenser, 100Hz–14kHz, 120dB SPL, powered by VZX-8 accessory bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomisable Priority Settings:\u003c\/strong\u003e Flexible announcement priority management for organised multi-zone communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMutual Exclusion Functionality:\u003c\/strong\u003e Prevents conflicting simultaneous announcements across zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 4 Simultaneous Active Pages:\u003c\/strong\u003e Across different zones for efficient multi-zone communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaisy-Chainable — Up to 8 Units Per VZX-8:\u003c\/strong\u003e Connect multiple call stations throughout a venue using standard CAT cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered by VZX-8 Accessory Bus:\u003c\/strong\u003e No separate power supply required — RJ45 connection provides both data and power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Chimes:\u003c\/strong\u003e Customisable chime selection per call station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Zamak Base:\u003c\/strong\u003e Exceptional stability and durability for demanding daily commercial use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabel Tray:\u003c\/strong\u003e Practical zone and function labelling area for intuitive staff operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48kHz Sample Rate:\u003c\/strong\u003e Professional audio processing for clear, intelligible voice transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature +5°C to +40°C:\u003c\/strong\u003e Suitable for a wide range of commercial indoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless V Series Integration:\u003c\/strong\u003e Designed specifically for use with the Dynacord VZX-8 Zone Audio Processor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":57545517171061,"sku":"DYNVCS8","price":619.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2083\/7259\/files\/WEBDYN00100_VCS8_2.webp?v=1788437509"}],"url":"https:\/\/www.audiovolt.co.uk\/collections\/dynacord.oembed","provider":"Audio Volt ","version":"1.0","type":"link"}